I don't know if this is allowed and if it is, I don't know if this is the correct forum, but here goes...
I need a small sensor mount to mount the sensor of the Super PID to my router motor. I tried to make this as simple as possible. It would need to be machined out of 1/4" acrylic and measures 2" x 1.25" x .25".
3D view:
This could be machined by hand, but I lack the necessary tools to do so at this time.
If anyone is interested in doing this, send me a PM with your price and we'll arrange payment and shipping in private.
Results 1 to 3 of 3
-
12-27-2010, 03:45 AM #1
Registered
- Join Date
- Sep 2007
- Posts
- 44
I need a small sensor mount machined...
-
12-27-2010, 12:21 PM #2
Registered
- Join Date
- Sep 2007
- Posts
- 44
Originally posted in the CNC Router Table Machines forum. I guess this is the correct forum...
-
12-28-2010, 04:11 AM #3
Registered
- Join Date
- Sep 2007
- Posts
- 44
Quote pending...
Reply With QuoteSimilar Threads
-
Proper mount for a small router
By DonFrambach in forum DIY CNC Router Table MachinesReplies: 1Last Post: 12-06-2010, 05:42 PM -
Small CNC job for sensor mounts
By jhuebbe in forum Employment OpportunityReplies: 13Last Post: 07-24-2009, 05:34 PM -
Need a few small machined parts
By justhman in forum Employment OpportunityReplies: 4Last Post: 04-21-2008, 06:22 PM -
Need small proto type machined
By DANTAMPA in forum MetalWork DiscussionReplies: 1Last Post: 11-14-2007, 04:37 PM -
Tool Mount For Jacobs Taper 3 mount
By pzzamakr1980 in forum Tormach Personal CNC MillReplies: 5Last Post: 03-29-2007, 08:31 PM
Posting Permissions
