[bayeng]

I just imported a Suda ST1212S CNC Router from China to Australia.

I need help with the installation / setup of the machine and program.

I got optional extras including vacuum bed, dust collection, spindle cooling system, servo motor.

the package did not come with instructions to setup the machine. some of the cords are basic and easy to assemble.

i am having trouble with the vacuum assembly.

i also am having trouble with setting up the port on the computer to transfer from TYPE 3 Software to the DSP Controller via the USB cable (printer cable)

i also need to know how to set the point of origon. currently it is on the bottom left which is fine, however it seems to be off the machine vacuum bed ( not at the correct position x-0 y-0 )

if someone could help me that would be excellent!!

THANX!

[king9558]

hi:
i am Alan, I have worked for years in the dsp company, so i think i can help if you are still in troulbe.
pls add my messenger: [email protected]
Regards
Alan

[GonCNC]

I myself got a SUDA a few weeks ago and I'm struggling with it. Please see if you cna help me with my post and perhaps we can help each other. I'm an electronic engineer and I must make this thing work :P

[Sarette]

Good afternoon GonCNC, I am not sure how I can help you. My machine is not in operation yet due to fact I do not have the operating programme.