585,722 active members*
4,392 visitors online*
Register for free
Login

Thread: Heidenhain iTNC530

Results 1 to 2 of 2
  1. 01-08-2011, 01:39 PM #1
    Jay Roy
    Jay Roy is offline Registered
    Join Date
    Oct 2006
    Posts
    4

    Heidenhain iTNC530

    Good morning all..
    Have a small problem..I'm wondering if anyone else has encountered this.
    I have an alarm coming up, Z axis too deep during BLUM cycle
    This started coming up after a crash. Also, the X axis is out of position by about 1MM..Any ideas?
    Thanks!
    Reply With Quote Reply With Quote
  2. 03-07-2011, 06:31 PM #2
    Jukka Honkanen
    Jukka Honkanen is offline Member
    Join Date
    Nov 2008
    Posts
    69
    First of all. You have to tell much more about the crash.
    Whitch axis did crash? What kind of machine you have?
    Are these too problems the only problems?
    What is the measuring system on Z-axis?
    What control do you have?
    Anyway with this info that we have now I guess that the clutch between Z-axis motor and ballscrew has rotated "away" when crash happened.

    Jukka
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. HEIDENHAIN iTNC530 SERVO MOTOR TUNING
    By wahidbashir in forum Bridgeport / Hardinge Mills
    Replies: 3
    Last Post: 03-21-2011, 02:38 PM
  2. I need your help post Heidenhain iTNC530 for ProEngineer
    By nbthuan68 in forum PTC Pro/Manufacture
    Replies: 1
    Last Post: 10-23-2009, 06:16 PM
  3. Heidenhain iTNC530 First StartUp
    By Leha_Blin in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 11-29-2008, 06:30 PM
  4. Heidenhain iTNC530, how to change plane?
    By Martynas2 in forum G-Code Programing
    Replies: 1
    Last Post: 11-23-2008, 04:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules