What size and type of screw should I use for my DIN Rail and Wire Duct? Attaching to metal. I think I would prefer self tappers, but any recommendation is good.
I want to order some at the same time I order the rail and wire duct.
Thanks
Results 1 to 2 of 2
-
01-14-2011, 02:34 AM #1
Registered
- Join Date
- Feb 2005
- Posts
- 344
DIN 3 Rail & Wire Duct Screw Sizes??
-
01-14-2011, 03:35 AM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24220
You can use self tapping, personally I use #10-32 Robertson head, and tap the back panel, I am not sure how popular or available Robertson is in the U.S.
I prefer the aluminum DIN rail as it usually has the mounting slots in it already.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With Quote
Similar Threads
-
Caps for screw on linear rail
By millman52 in forum Plasma, EDM / Other similar machine Project LogReplies: 7Last Post: 04-21-2009, 02:42 PM -
power supply size? for multi wire (total 250 inches of wire)
By DanOSB in forum CNC Wire Foam Cutter MachinesReplies: 5Last Post: 03-02-2009, 11:34 PM -
K2 rail & screw grease
By leo.dearden in forum K2CNCReplies: 1Last Post: 02-27-2008, 03:55 PM -
Suppliers for wire carriers and Ball screw
By ralbery in forum Want To Buy...Need help!Replies: 0Last Post: 01-28-2008, 06:21 AM -
CNC for a/c duct liner
By WMACS in forum Open Source CNC Machine DesignsReplies: 0Last Post: 10-02-2007, 07:18 PM
Posting Permissions
