Hello guys,
I have Hurco BMC 40 and have some kind of problem. im not sure what with pro engineer wildfire 2, what kind of postprocessor should i use, and what should be changed in the program (file with the command lines).
Best Regards.
Results 1 to 1 of 1
-
01-15-2011, 06:23 PM #1
Registered
- Join Date
- Jan 2011
- Posts
- 0
Hurco BMC 40 type of postprocessor
Reply With QuoteSimilar Threads
-
G71/G72 type I vs. type II cycles
By sinha_nsit in forum FanucReplies: 4Last Post: 08-28-2010, 11:20 AM -
Anyone Have a Hurco Tape Emulator/Hurco Tapes?
By KyleH2 in forum HURCOReplies: 2Last Post: 01-06-2010, 12:26 AM -
Postprocessor for EMC
By lumberjack_jeff in forum FeatureCAM CAD/CAMReplies: 0Last Post: 09-10-2009, 06:50 PM -
G71 type I and type II cycles
By sinha_nsit in forum FanucReplies: 5Last Post: 11-03-2008, 12:34 PM -
postprocessor
By jrcalleja in forum PTC Pro/ManufactureReplies: 2Last Post: 09-17-2008, 02:14 PM
Tags for this Thread
Posting Permissions
