[Pocock1]

I am not new to CNC machining, but am new to owning my own machine. I have a line on a Multi Cam MG 308, and am curious what you folks think it is worth? I do not know how old a machine it is. It has had lots of use, in a heavy industrial setting.

ANY info would be GREATLY appreciated!

Thanks in advance!

[MCPservice]

Would need to see some pics, to get a rough idea.

[Pocock1]

Here are some pics! Thanks!

[MCPservice]

Are you sure it is a 308, this looks to be a 10 by 20 machine.

maybe a 12 by 20...let me know

[Pocock1]

Nope the guy says its a MG 308. 7' x 20'.

It is not local to me, so I have not been able to actually see the machine in person.

[MCPservice]

What other options come with this machine, is their a vacuum pump, tooling, software, spare parts.

[Pocock1]

Definitely tools and an 8-tool changer. Software and Vacuum too.

[MCPservice]

What is the software type and the vacuum horse power.

[Pocock1]

20 hp vac, Master Cam software.

[MCPservice]

Without actually doing a physical inspection of the machine, you are probably looking at a range between 25K-35K, and that will still be dependent on if the machine needs repair or replacement of wear and tear parts ie, belts,pinions,super nut, is the spindle in good condition and so on.