501,832 active members
6,977 visitors online
Register for free
Login
Page 2 of 3 123
Results 13 to 24 of 32
  1. #13
    Registered
    Join Date
    Dec 2011
    Posts
    0
    hi! Anthony,

    we have one Toyoda HMC in which due to betary problem we are unble to run the machine. plese help us to short the problem.
    Machine Model:FA550 HMC Machine
    Machine No:NM7611 (toyoda machine works Ltd.)

    In this machine we have problem with ATC(Tool Magazine)and ATC Arm ,both were driven by toyoda MG-U050 & Toyoda MG-U030 positioning controller with servo motor. In this machine error and warning led are red.

    So please guide us how can we solve this problem?

    Can you provide us keypad MC1K-P to set the positioning controller MG-U050

    My email id : visionmechatronics@yahoo.com

  2. #14
    Registered
    Join Date
    Oct 2007
    Posts
    3
    Hi Anthony,
    I will be changing the bellville washers for the tool retention
    on a Toyoda FHN50II NM6027 it is a 84 model
    I have ordered the washer set from Toyoda...Is there a service
    manual with instructions for changing these out..... any
    information with the orientation, number of,
    and stacking direction of the washers would be a great help....

  3. #15
    Registered
    Join Date
    Jun 2012
    Posts
    0
    Hello,
    We have a FA 450 and we are having issues with the tool changer. The main arm slips off of the tool it is trying to retrieve out of the magazine. Any ideas on what to trouble-shoot?

  4. #16
    Registered
    Join Date
    Mar 2008
    Posts
    1

    Rebuilt spindile - vibration at max rpm

    Hello Anthony,
    We have a toyoda BM 1400 VMC, IT is about 6 years old. We have had to have the spindle rebuilt twice in the last 90 days. We have just had the spindle put back in the machine and the tech person told us to do a warm-up before we ran any parts. During the warm up at max rpm's ( 6000 rpm )we can feel some vibration in the machine and the load meter jumps up to 8 to 10 percent. Do you think this is normal for a newly rebuilt spindle?

    Thanks for your help
    Bill

  5. #17
    Registered
    Join Date
    Jan 2010
    Posts
    11
    Hi Anthony, on a FA450 with a M530MH control. The control was not coming up, we got all that squared away, but when we press the F0 button and press the function switch none of the switches come up. Do you know how to set that up?

    Thanks,

    cruiser1821

  6. #18
    Registered
    Join Date
    Sep 2008
    Posts
    25
    I have a FH45 4 axis with an added axis (5th) that i need to remove. the control is an 11MA and i am not seeing what i need to in the manuals (if i even have a complete set). any help would be greatly appreciated.

    Thank you,
    carter

  7. #19
    Registered
    Join Date
    Oct 2013
    Posts
    2
    Hi Anthony, my name is Atanas from Montreal. I just get registered on this site and I sow that you have a good experiance with the Toyoda. I hope that you could help me .
    Here is my problem: I have a Toyoda BM 1200 with Fanuc 18i-MB.
    For some reason my tool magazin (30 tool ) stop counting my tools located in pot 10 to 15. Other wise as soon as my counter hits hexadecimal "A" to "F" tools based in these pots are invisible on the screen.
    If I keep going with my "Magazin CW" button, at dec."16" - hex. "10" my screen start showing tool located at pots 16,17,18 e.t.c till 25 (1A hex.). And then after the same happen again and again. It looks like any time my counter reach the letters for some reason the numbers are not showed on the screen.
    I reset the magazine - at "PMC", "Data"(there is no G.Data on that one) my D0000 is 99. At D0001 I put 1, D0002 I put 2......till D0030=30. That didn't change anything!!!.
    My counter for the magazine is C0000 or C0002 (I thing ??). The value is 48 (I don't now why, but any other values that I put, the magazine stop counting at all!!!) In the ladder I can see the counter going from 0 to 2F (dec.48) no problem.
    My sensors : "magazine cw", "magazine in position" and "tool pot No.1" are working fine ( I can see them in the "diagnostics".
    I load PMC prm. and NC prm. from. manifacture CD rom. Still the same problem!!!
    Do you thing you could help me.
    Thanks

  8. #20
    Registered
    Join Date
    Jan 2015
    Posts
    1

    Re: Toyoda representative here if you have any questions

    Hi Anthony,
    I have recently started running a 1989 Toyoda FH55 at work and was wondering if there was a cheat sheet for the M-codes and machine operations
    Thnaks

  9. #21
    Registered
    Join Date
    Sep 2008
    Posts
    25

    Re: Toyoda representative here if you have any questions

    Quote Originally Posted by MachineZilla View Post
    Hi Anthony,
    I have recently started running a 1989 Toyoda FH55 at work and was wondering if there was a cheat sheet for the M-codes and machine operations
    Thnaks
    Anthony never responded to my question...

    we have an fh45 with an 11m control, but, i will not be near that machine until monday. remind me (this thing emails me) and i will see if i have an mcode listing in the manuals

  10. #22
    Registered
    Join Date
    Nov 2006
    Posts
    2

    Re: Toyoda representative here if you have any questions

    Hi my name is Donald. Anthony I hope your are still monitoring this thread? I am looking for a diagram showing the spindle assembly in a Toyoda FA550 12000 rpm. I believe I need to increase the preload, having some finish issues. The ways have been ball bar tested and have a maximum of 0.0001" on all axes at 12.5" diameter. The finish on the parts deteriorates as the day goes on some tools only.

    Thanks!

  11. #23
    Registered
    Join Date
    Jun 2006
    Posts
    7

    Re: Toyoda representative here if you have any questions

    I have a Toyoda FH-45 horz. mill and the hydrolic cylinder for y axis slow down counter balance ? I think that is what you call it. mounted on top behind Y axis motor is leaking real bad from sitting to long in my garage about 32 inch long with 25 MM shaft. I can not find the seals for it. do you happen to know what they are so that I can get some to repair it. 10,000 rpm machine Ser. NM-6320 wbodde@kc.rr.com

  12. #24
    Registered
    Join Date
    Jun 2006
    Posts
    7

    Re: Toyoda representative here if you have any questions

    I have a FH-45 horz. mill, with 11M fanuc control and is there a M code or codes for working the tool changer to rotate, pull, push, clamp, unclamp in mdi without having to manually push the valves in to move when jammed up ? Just like they do for the pallet changer

Page 2 of 3 123

Similar Threads

  1. Replies: 2
    Last Post: 09-17-2017, 09:47 PM
  2. ezRouter Representative Available for Questions and Comments
    By ezRouter in forum EZ-Router (Plasma only)
    Replies: 0
    Last Post: 06-14-2012, 09:57 PM
  3. Sales representative for US & Canadian market
    By METALPLASTIKA in forum Employment Opportunity
    Replies: 0
    Last Post: 02-07-2011, 12:48 PM
  4. WANTED SALES REPRESENTATIVE
    By cmfugen in forum Employment Opportunity
    Replies: 0
    Last Post: 01-13-2011, 04:02 AM
  5. Technical Support Representative
    By mgrtorm in forum Employment Opportunity
    Replies: 0
    Last Post: 12-26-2008, 09:09 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •