[LaserToolShop]

It's not the first time. Just after system has loaded, those messages appears on my sodick A535 MK25.
E064 error 64 has occured (SH) press ACK
or
E065 error message 65 has occured (63) press ACK
and when hit ACK key
E171 alarm in nc power.
just one time
E201 power down (63) press ACK.
Usually, I plug out and replug in ST and EFII pcboards connectors on cabinets and machine restart but I never knew exactely what's wrong ?
I try to learn how to use IN-OUT tables on SET-CHCK menu, but I don't understand what I have to check or change on those tables.
Could you have an idea ?
Thanks a lot

[LaserToolShop]

E064 error 64 has occured
(SH) press ack persist !
I tried to reboot directely PC's machine.
System loading progress from 11 to 48 and show yellow message Sys2/Sys3.
Would it be hasardous reloading floppy disk systems 2 and 3 ?
I suspect ST pcb's function to blame.
Did someone have similar experience?
In the past i had several times E078 error78 (SH), I found to restart by plug out replug in pcb, but I never known why.

[LaserToolShop]

It miss cabinet air circulation when it's very hot.
CPU was a little bit unplugged on IO/07 board.
I removed board, put it on a flat table and pressed firmly on CPU, it plug on socket much better.
Since 2012, I never have had those errors codes any more.

[Moums233]

It miss cabinet air circulation when it's very hot.
CPU was a little bit unplugged on IO/07 board.
I removed board, put it on a flat table and pressed firmly on CPU, it plug on socket much better.
Since 2012, I never have had those errors codes any more.

Good Day,

I have same problem with my sodick A530 since 4 month ago. I tray to solve the problem but i dont have electrical drawing, so pls if you have electrical doc send it for me, i will be gratiful and thank you in advance.

my email: [email protected]

Best regards.

[LaserToolShop]

Good Day,

I have same problem with my sodick A530 since 4 month ago. I tray to solve the problem but i dont have electrical drawing, so pls if you have electrical doc send it for me, i will be gratiful and thank you in advance.

my email: [email protected]

Best regards.

what's your controller ? EX or MK
Could you explain exactely your problem (error codes?)

[Moums233]

what's your controller ? EX or MK
Could you explain exactely your problem (error codes?)

Réf : SODICK A535 N°0041 MARK 25

Code error: E064 (SH) press ACK

pls check attachement fil.

N.B: if ypu have electrical drawing send it to me by mail.

Thank you very much in advance.

best regards.

Mohamed ([email protected]).