We have around 3000 G-Code files (only 2D), but do not have the CAD data for them. So we are looking for a G-Code to dxf converter that can do this job.
Could you guys let me know whcih software does this best, or could you name a few of them that do this so that i can try them.
Thank you.
Chandra.
Results 1 to 5 of 5
-
07-25-2005, 07:35 PM #1
Registered
- Join Date
- Jul 2005
- Posts
- 2
Software to convert G-code to dxf
-
07-25-2005, 07:57 PM #2
Registered
- Join Date
- Jun 2005
- Posts
- 73
I've been using this one:
follow this link. I've used it- but it freaks out on arcs in my experience.
http://www.cnczone.com/forums/showthread.php?t=8814
-
07-25-2005, 09:55 PM #3
Gold Member
- Join Date
- Mar 2003
- Posts
- 765
Chandra,
Check out NCPlot v2:
www.ncplot.com
NCPlot is a G-Code editor / backplotter with DXF export capability. It's free to use until the beta period is over (I don't know how long this is going to be). If it works out for you, I could be persuaded to build a batch converter (3000 files!).
Regards,
Scott
-
07-25-2005, 10:22 PM #4
Registered
- Join Date
- Jul 2005
- Posts
- 2
Thanks a lot Scott, this software does a good job as compared to the other softwares i am trying in the last few days.
Regards,
Chandra.
-
07-25-2005, 10:31 PM #5
Registered
- Join Date
- Apr 2003
- Posts
- 348
onecnc xr can do it
Reply With Quote
Posting Permissions
