584,829 active members*
5,088 visitors online*
Register for free
Login
Results 1 to 6 of 6
  1. #1
    Join Date
    Apr 2005
    Posts
    131

    Question SmartCam 11 post for Mach 3

    Hi all, would anyone have a post processor / code generator for mach 3?

    OR, which similar controller post could be used instead of a mach 3 specific to start building one? Say, modify a Fanuc or a Masak post?

    Thanks
    Paraman, Parabeast, Paramachine, Parameter.
    The many in one and the one in the many.

  2. #2
    Join Date
    Jan 2007
    Posts
    1389
    you can download free generic code files on smartcamcnc.com

    smartcams code generators are the easiest code generators to play with. very simple.
    you will need the code generation book that should be avail on the site as well.

    Delw

  3. #3
    Join Date
    Feb 2008
    Posts
    10
    Hi,
    Do you have a programming manual with code examples???

  4. #4
    Join Date
    Jan 2007
    Posts
    1389
    I have the org manuals from dos too version 9 .

    They should be on smartcamcnc website

  5. #5
    Join Date
    Feb 2008
    Posts
    10
    Hi, Are you referring to the SmartCam Manuals or the Mach3.
    I meant if you have a programming manual for the mach 3 I may be able to get a code generator going.
    I have been using Smartcam for quite a while and am now using freeform V17.6.
    I am not sure if you can send attachments through the forum here but if you can send it over and I'll take a look.

    Ed

  6. #6
    Join Date
    Jan 2007
    Posts
    1389
    Was referring to the smartcam manuals

Similar Threads

  1. Mach 2 Mach 3 Post Processor
    By IntarisiaQ4 in forum Australia, New Zealand Club House
    Replies: 0
    Last Post: 10-17-2009, 11:50 PM
  2. need post files for smartcam ( Haas machine )
    By cv252525 in forum Uncategorised CAM Discussion
    Replies: 3
    Last Post: 02-25-2008, 04:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •