Hi all

I've got a Fuling DZB200M single -> 3 phase inverter. The unit came set to keyboard mode, meaning that I can control run/fwd, run/reverse, speed and stop all from the keyboard on the inverter. I want to put it into terminal mode, so I can control the inverter from Mach3. I found an english manual online, but I can't seem to get it into the programming mode so I can change over to terminal control.

If I scroll through the menus while stopped all I get is:

H0.00
F0.00
P 00
H0.00
A 0.0
FRD

From the manual I gather that I should select F0.00 then press FUNC/DATA to enter the menus. But it won't do anything. I can't scroll through the sub menus. The manual mentions a password but the unit never asks for a password (not that I've set one up). It should hopefully be factory default settings but I can't find anything about to reset it anyway.

Does anyone have any ideas with the beast?

Cheers - Matt