584,802 active members*
4,926 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Knee Vertical Mills > Enshu Yuasa AccuMill 1547 with Fanuc 3M
Results 1 to 5 of 5
  1. #1
    Join Date
    Jan 2011
    Posts
    0

    Enshu Yuasa AccuMill 1547 with Fanuc 3M

    I keep getting a Z overtravel alarm. While attempting a reference return it will go above zero and trip out on a servo reading before hitting the overtravel limit switch..
    How do you calibrate this axis?

  2. #2
    Join Date
    Nov 2009
    Posts
    93
    Please check the limit switch, its resistance should change as the dog moves its arm past the contact point...

  3. #3
    Join Date
    Jan 2011
    Posts
    0
    Which limit switch? I have a upper a lower and a slowdown on the left side.

  4. #4
    Join Date
    Nov 2009
    Posts
    93
    Well, since the Z axis is probably over travelling going in the up (Z+) direction, I would check all of the limit swithces that it is hitting going up (in direction of the alarm) first.

  5. #5
    Join Date
    Aug 2020
    Posts
    14

    Re: Enshu Yuasa AccuMill 1547 with Fanuc 3M

    Quote Originally Posted by fixer2 View Post
    Which limit switch? I have a upper a lower and a slowdown on the left side.

    I have similar problem but it is a not ready alarm that won’t go away.

    Here are details: https://www.cnczone.com/forums/fanuc...tem-ready.html

Similar Threads

  1. NEED ADVICE re: Enshu Yuasa AccuMill 1547 with Fanuc 3M
    By crobox in forum Knee Vertical Mills
    Replies: 47
    Last Post: 01-20-2023, 10:00 PM
  2. Enclosure for a Enshu AccuMill
    By AccuMillGuy in forum Knee Vertical Mills
    Replies: 1
    Last Post: 08-28-2020, 12:47 PM
  3. enshu yuasa accu-mill am1547 tool offsets?
    By kustomkb in forum Uncategorised MetalWorking Machines
    Replies: 3
    Last Post: 08-28-2020, 12:44 PM
  4. HELP Enshu Yuasa AccuMill 1547 with Fanuc 3M
    By EDL at AU in forum Knee Vertical Mills
    Replies: 1
    Last Post: 08-28-2020, 12:31 PM
  5. Troubles with YUASA ACCU-MILL AM 1547
    By thucmie in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 09-09-2008, 08:37 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •