I am designing a screenset for my foamcutter and I would like to display the 2 2-axis towers on the page. I am setting up the X-Z and A-B axises to be the toolpath axises. My current options are for X-Y, X-Z, or Y-Z. How can I change the toolpath to incorporate the other axis options? What I need to display is X-Z and A-B.
Results 1 to 2 of 2
-
02-05-2011, 08:27 PM #1
Registered
- Join Date
- Jul 2007
- Posts
- 15
Need to display toolpath window for A-B Axis
-
02-05-2011, 09:18 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
I don't think you can.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
Help with toolpath display
By Super Coffee in forum Mach Software (ArtSoft software)Replies: 2Last Post: 08-03-2010, 12:27 AM -
Toolpath display.
By RobH in forum Mach MillReplies: 3Last Post: 03-31-2010, 04:57 PM -
Toolpath Display
By summy in forum SolidCAM for SolidWorks and SolidCAM for InventorReplies: 5Last Post: 12-02-2009, 02:51 AM -
mach3 display window
By eloid in forum DIY CNC Router Table MachinesReplies: 2Last Post: 08-10-2009, 03:00 AM -
Toolpath display
By raytor in forum Mach MillReplies: 1Last Post: 11-04-2006, 03:54 PM
Posting Permissions
