[amadeo_ortiz]

Does Anyone can help me, because we made a mistake changing the Battery of my Mori Seiki SL-2 and we must to plug the new battery in the 3CN before unplug de old one from 2CN and now the follow codes are on my CRT:

400 SEQ ERROR2
175 MEM ERROR (MACR)
174 MEM ERROR (KEEP)
173 MEM ERROR (PRM)
172 MEM ERROR (SET)

Can anyone help me because we haven´t operation manual and maintenance manual, I only have the Yasnac LX1 controller manual and i´ve read about it and everybody say that i need to reenter parameters, I really need your help!

Or any idea about release those Alarms from my Lathe..

this is a Mori Seiki SL-2 with Yasnac LX1

[DouglasR]

I strongly suggest going on ebay and searching manuals out there.

[amadeo_ortiz]

I´ve watching a pair of post on eBay but both are for MoriSeiki´s SL-3 and mine is a SL-2 i don´t know if take a risk of buy one of there... does anyone can sell to me this info for my SL-2. My email is: [email protected] Or do you think that it can fit with my case because i guess too than all LX1 for SL series are similar, but think about machine sizes, we should never unplug this battery LOL thanks for you help man!

[DouglasR]

as long as the control is the same it shouldn't make too much difference.

[Waynno]

I can get that parameter set and post it here tomorrow.

You may have to do a regeneration reset of the entire control to get rid of any corrupt data, Now is the time to do just that

Wayne

[underthetire]

I have the tech sheet on how to reverse x axis if you need it. A lot of early machines were converted to x- machines to match the really old machines. Factory was x+.

[amadeo_ortiz]

I can get that parameter set and post it here tomorrow.

You may have to do a regeneration reset of the entire control to get rid of any corrupt data, Now is the time to do just that

Wayne

I really appreciate your Help Wayne, if you need my email is: [email protected] Thanks a lot man!!

[amadeo_ortiz]

I have the tech sheet on how to reverse x axis if you need it. A lot of early machines were converted to x- machines to match the really old machines. Factory was x+.

How to do that? I don´t know if this is possible on my machine, but i can do if you recommend it !

[Waynno]

Parameter list for SL-2H

N6000 X 32
N6001 X 129
N6002 X 128
N6003 X 17
N6004 X 2
N6005 X 70
N6006 X 20
N6007 X 68
N6008 X 0
N6009 X 192
N6010 X 49
N6011 X 0
N6012 X 0
N6013 X 0
N6014 X 0
N6015 X 0
N6016 X 0
N6017 X 131
N6018 X 0
N6019 X 32
N6020 X 7
N6021 X 12
N6022 X 131
N6023 X 0
N6024 X 68
N6025 X 0
N6026 X 7
N6027 X 25
N6028 X 7
N6029 X 25
N6030 X 0
N6031 X 1
N6032 X 14
N6033 X 85
N6034 X 0
N6035 X 92
N6036 X 92
N6037 X 0
N6038 X 0
N6039 X 65
N6040 X 255
N6041 X 63
N6042 X 3
N6043 X 250
N6044 X 98
N6045 X 102
N6046 X 31
N6047 X 123
N6048 X 34
N6049 X 0
N6050 X 12
N6051 X 12
N6052 X 0
N6053 X 0
N6054 X 0
N6055 X 0
N6056 X 64
N6057 X 64
N6058 X 0
N6059 X 0
N6060 X 0
N6061 X 0
N6062 X 0
N6063 X 0
N6064 X 0
N6065 X 0
N6066 X 0
N6067 X 0
N6068 X 0
N6069 X 0
N6070 X 0
N6071 X 0
N6072 X 0
N6073 X 0
N6074 X 64
N6075 X 64
N6076 X 0
N6077 X 0
N6078 X 0
N6079 X 0
N6080 X 8
N6081 X 15
N6082 X 0
N6083 X 3
N6084 X 6
N6085 X 10
N6086 X 0
N6087 X 0
N6088 X 0
N6089 X 0
N6090 X 0
N6091 X 0
N6092 X 25
N6093 X 10
N6094 X 7
N6095 X 10
N6096 X 0
N6097 X 0
N6098 X 0
N6099 X 0
N6100 X 0
N6101 X 0
N6102 X 0
N6103 X 0
N6104 X 0
N6105 X 0
N6106 X 0
N6107 X 0
N6108 X 0
N6109 X 0
N6110 X 0
N6111 X 0
N6112 X 0
N6113 X 0
N6114 X 23
N6115 X 24
N6116 X 51
N6117 X 52
N6118 X 0
N6119 X 0
N6120 X 0
N6121 X 0
N6122 X 0
N6123 X 0
N6124 X 0
N6125 X 0
N6126 X 0
N6127 X 0
N6128 X 0
N6129 X 0
N6130 X 0
N6131 X 0
N6132 X 0
N6133 X 0
N6134 X 0
N6135 X 0
N6136 X 0
N6137 X 0
N6138 X 0
N6139 X 0
N6140 X 0
N6141 X 0
N6142 X 0
N6143 X 0
N6144 X 0
N6145 X 0
N6146 X 0
N6147 X 0
N6148 X 0
N6149 X 0
N6160 X 0
N6161 X 0
N6162 X 0
N6163 X 0
N6164 X 0
N6165 X 0
N6166 X 0
N6167 X 0
N6168 X 0
N6169 X 0
N6170 X 0
N6171 X 0
N6172 X 0
N6173 X 0
N6174 X 0
N6175 X 0
N6176 X 0
N6177 X 0
N6178 X 0
N6179 X 0
N6180 X 0
N6181 X 0
N6182 X 0
N6183 X 0
N6184 X 0
N6185 X 0
N6186 X 0
N6187 X 0
N6188 X 0
N6189 X 0
N6190 X 0
N6191 X 0
N6192 X 0
N6193 X 0
N6194 X 0
N6195 X 0
N6196 X 0
N6197 X 0
N6198 X 0
N6199 X 0
N6200 X 0
N6201 X 0
N6202 X 500
N6203 X 500
N6204 X 0
N6205 X 0
N6206 X 0
N6207 X 0
N6208 X 0
N6209 X 0
N6210 X 0
N6211 X 0
N6212 X 0
N6213 X 0
N6214 X 0
N6215 X 0
N6216 X 0
N6217 X 0
N6218 X 0
N6219 X 0
N6220 X 40
N6221 X 0
N6222 X 800
N6223 X 0
N6224 X 40
N6225 X 0
N6226 X 0
N6227 X 0
N6228 X 9600
N6229 X 0
N6230 X 10
N6231 X 128
N6232 X 0
N6233 X 0
N6234 X 3
N6235 X 4
N6236 X 6
N6237 X 8
N6238 X 12
N6239 X 20
N6240 X 30
N6241 X 40
N6242 X 60
N6243 X 80
N6244 X 120
N6245 X 200
N6246 X 300
N6247 X 400
N6248 X 600
N6249 X 800
N6250 X 1200
N6251 X 2000
N6252 X 3000
N6253 X 4000
N6254 X 0
N6255 X 0
N6256 X 0
N6257 X 0
N6258 X 0
N6259 X 0
N6260 X 0
N6261 X 0
N6262 X 0
N6263 X 0
N6264 X 0
N6265 X 0
N6266 X 1310
N6267 X 4000
N6268 X 0
N6269 X 0
N6270 X 0
N6271 X 1310
N6272 X 4000
N6273 X 0
N6274 X 0
N6275 X 30
N6276 X 0
N6277 X 0
N6278 X 0
N6279 X 0
N6280 X 1280
N6281 X 1280
N6282 X 0
N6283 X 0
N6284 X 0
N6285 X 0
N6286 X 50
N6287 X 50
N6288 X 0
N6289 X 0
N6290 X 0
N6291 X 0
N6292 X 0
N6293 X 0
N6294 X 0
N6295 X 0
N6296 X 0
N6297 X 0
N6298 X 0
N6299 X 0
N6300 X 0
N6301 X 0
N6302 X 0
N6303 X 0
N6304 X 3410
N6305 X 2654
N6306 X 0
N6307 X 0
N6308 X 0
N6309 X 0
N6310 X 40
N6311 X 40
N6312 X 0
N6313 X 0
N6314 X 0
N6315 X 0
N6316 X 20
N6317 X 20
N6318 X 0
N6319 X 0
N6320 X 0
N6321 X 0
N6322 X 0
N6323 X 0
N6324 X 0
N6325 X 0
N6326 X 0
N6327 X 0
N6328 X 0
N6329 X 0
N6330 X 0
N6331 X 0
N6332 X 0
N6333 X 0
N6334 X 0
N6335 X 0
N6336 X 0
N6337 X 0
N6338 X 0
N6339 X 0
N6340 X 0
N6341 X 0
N6342 X 0
N6343 X 2600
N6344 X 430
N6345 X 2000
N6346 X 15
N6347 X 0
N6348 X 0
N6349 X 0
N6500 X 0
N6501 X 0
N6502 X 0
N6503 X 0
N6504 X 0
N6505 X 0
N6506 X 0
N6507 X 0
N6508 X 0
N6509 X 0
N6510 X 0
N6511 X 0
N6512 X 0
N6513 X 0
N6514 X 0
N6515 X 0
N6516 X 0
N6517 X 0
N6518 X 0
N6519 X 0
N6520 X 0
N6521 X 0
N6522 X 0
N6523 X 0
N6524 X 0
N6525 X 0
N6526 X 0
N6527 X 0
N6528 X 0
N6529 X 0
N6530 X 0
N6531 X 0
N6532 X 0
N6533 X 0
N6534 X 0
N6535 X 0
N6536 X 0
N6537 X 0
N6538 X 0
N6539 X 0
N6540 X 0
N6541 X 0
N6542 X 0
N6543 X 0
N6544 X 0
N6545 X 0
N6546 X 0
N6547 X 0
N6548 X 0
N6549 X 0
N6550 X 0
N6551 X 0
N6552 X 0
N6553 X 0
N6554 X 0
N6555 X 0
N6556 X 0
N6557 X 0
N6558 X 0
N6559 X 0
N6560 X 0
N6561 X 0
N6562 X 0
N6563 X 0
N6564 X 0
N6565 X 0
N6566 X 0
N6567 X 0
N6568 X 0
N6569 X 0
N6570 X 0
N6571 X 0
N6572 X 0
N6573 X 0
N6574 X 0
N6575 X 0
N6576 X 0
N6577 X 0
N6578 X 0
N6579 X 0
N6600 X 263200
N6601 X 49780
N6602 X 0
N6603 X 0
N6604 X 0
N6605 X 0
N6606 X- 56800
N6607 X- 360220
N6608 X 0
N6609 X 0
N6610 X 0
N6611 X 0
N6612 X 0
N6613 X 0
N6614 X 0
N6615 X 0
N6616 X 0
N6617 X 0
N6618 X 0
N6619 X 0
N6620 X 0
N6621 X 0
N6622 X 0
N6623 X 0
N6624 X 0
N6625 X 0
N6626 X 0
N6627 X 0
N6628 X 0
N6629 X 0
N6630 X 0
N6631 X 0
N6632 X 0
N6633 X 0
N6634 X 0
N6635 X 0
N6636 X 0
N6637 X 0
N6638 X 0
N6639 X 0
N6640 X 0
N6641 X 0
N6642 X 0
N6643 X 0
N6644 X 0
N6645 X 0
N6646 X 0
N6647 X 0
N6648 X 0
N6649 X 0
N6650 X 0
N6651 X 0
N6652 X 0
N6653 X 0
N6654 X 0
N6655 X 0
N6656 X 0
N6657 X 0
N6658 X 0
N6659 X 0
N7000 X 12
N7001 X 1
N7002 X 0
N7003 X 0
N7004 X 0
N7005 X 0
N7006 X 1
N7007 X 1
N7008 X 0
N7009 X 0
N7010 X 0
N7011 X 0
N7012 X 0
N7013 X 0
N7014 X 0
N7015 X 1
N7016 X 0
N7017 X 0
N7018 X 0
N7019 X 0
N7020 X 0
N7021 X 0
N7022 X 0
N7023 X 0
N7024 X 1
N7025 X 0
N7026 X 0
N7027 X 0
N7028 X 0
N7029 X 0
N7030 X 2
N7031 X 0
N7032 X 0
N7033 X 0
N7034 X 0
N7035 X 0
N7036 X 0
N7037 X 0
N7038 X 0
N7039 X 0
N7040 X 0
N7041 X 0
N7042 X 3
N7043 X 6
N7044 X 5
N7045 X 10
N7046 X 12
N7047 X 9
N7048 X 18
N7049 X 20
N7050 X 17
N7051 X 34
N7052 X 36
N7053 X 33
N7054 X 0
N7055 X 0
N7056 X 0
N7057 X 0
N7058 X 0
N7059 X 0
N7060 X 50
N7061 X 80
N7062 X 12
N7063 X 0
N7064 X 0
N7065 X 0
N7066 X 0
N7067 X 50
N7068 X 16
N7069 X 8
N7070 X 5
N7071 X 10
N7072 X 0
N7073 X 0
N7074 X 0
N7075 X 0
N7076 X 0
N7077 X 0
N7078 X 80
N7079 X 0
N7080 X 0
N7081 X 0
N7082 X 0
N7083 X 0
N7084 X 0
N7085 X 0
N7086 X 0
N7087 X 0
N7088 X 0
N7089 X 0
N7090 X 0
N7091 X 2
N7092 X 0
N7093 X 0
N7094 X 0
N7095 X 8
N7096 X 0
N7097 X 0
N7098 X 0
N7099 X 0
N8000 X 0
N8001 X 0
N8002 X 0
N8003 X 0
N8004 X 0
N8005 X 0
N8006 X 0
N8007 X 0
N8008 X 0
N8009 X 0
N8010 X 0
N8011 X 0
N8012 X 0
N8013 X 0
N8014 X 0
N8015 X 0
N8016 X 0
N8017 X 0
N8018 X 0
N8019 X 0
N8020 X 0
N8021 X 0
N8022 X 0
N8023 X 0
N8024 X 0
N8025 X 0
N8026 X 0
N8027 X 0
N8028 X 0
N8029 X 0
N8030 X 0
N8031 X 0
N8032 X 0
N8033 X 0
N8034 X 0
N8035 X 0
N8036 X 0
N8037 X 0
N8038 X 0
N8039 X 0
N8040 X 0
N8041 X 0
N8042 X 0
N8043 X 0
N8044 X 0
N8045 X 0
N8046 X 0
N8047 X 0
N8048 X 0
N8049 X 0
N8050 X 0
N8051 X 0
N8052 X 0
N8053 X 0
N8054 X 0
N8055 X 0
N8056 X 0
N8057 X 0
N8058 X 0
N8059 X 0
N8060 X 0
N8061 X 0
N8062 X 0
N8063 X 0
N8064 X 0
N8065 X 0
N8066 X 0
N8067 X 0
N8068 X 0
N8069 X 0
N8070 X 0
N8071 X 0
N8072 X 0
N8073 X 0
N8074 X 0
N8075 X 0
N8076 X 0
N8077 X 0
N8078 X 0
N8079 X 0
N8080 X 0
N8081 X 0
N8082 X 0
N8083 X 0
N8084 X 0
N8085 X 0
N8086 X 0
N8087 X 0
N8088 X 0
N8089 X 0
N8090 X 0
N8091 X 0
N8092 X 0
N8093 X 0
N8094 X 0
N8095 X 0
N8096 X 0
N8097 X 0
N8098 X 0
N8099 X 0
N8100 X 0
N8101 X 0
N8102 X 0
N8103 X 0
N8104 X 0
N8105 X 0
N8106 X 0
N8107 X 0
N8108 X 0
N8109 X 0
N8110 X 0
N8111 X 0
N8112 X 0
N8113 X 0
N8114 X 0
N8115 X 0
N8116 X 0
N8117 X 0
N8118 X 0
N8119 X 0
N8120 X 0
N8121 X 0
N8122 X 0
N8123 X 0
N8124 X 0
N8125 X 0
N8126 X 0
N8127 X 0
N8128 X 0
N8129 X 0
N8130 X 0
N8131 X 0
N8132 X 0
N8133 X 0
N8134 X 0
N8135 X 0
N8136 X 0
N8137 X 0
N8138 X 0
N8139 X 0
N8140 X 0
N8141 X 0
N8142 X 0
N8143 X 0
N8144 X 0
N8145 X 0
N8146 X 0
N8147 X 0
N8148 X 0
N8149 X 0
N8150 X 0
N8151 X 0
N8152 X 0
N8153 X 0
N8154 X 0
N8155 X 0
N8156 X 0
N8157 X 0
N8158 X 0
N8159 X 0
N8160 X 0
N8161 X 0
N8162 X 0
N8163 X 0
N8164 X 0
N8165 X 0
N8166 X 0
N8167 X 0
N8168 X 0
N8169 X 0
N8170 X 0
N8171 X 0
N8172 X 0
N8173 X 0
N8174 X 0
N8175 X 0
N8176 X 0
N8177 X 0
N8178 X 0
N8179 X 0
N8180 X 0
N8181 X 0
N8182 X 0
N8183 X 0
N8184 X 0
N8185 X 0
N8186 X 0
N8187 X 0
N8188 X 0
N8189 X 0
N8190 X 0
N8191 X 0
N8192 X 0
N8193 X 0
N8194 X 0
N8195 X 0
N8196 X 0
N8197 X 0
N8198 X 0
N8199 X 0
N8200 X 0
N8201 X 0
N8202 X 0
N8203 X 0
N8204 X 0
N8205 X 0
N8206 X 0
N8207 X 0
N8208 X 0
N8209 X 0
N8210 X 0
N8211 X 0
N8212 X 0
N8213 X 0
N8214 X 0
N8215 X 0
N8216 X 0
N8217 X 0
N8218 X 0
N8219 X 0
N8220 X 0
N8221 X 0
N8222 X 0
N8223 X 0
N8224 X 0
N8225 X 0
N8226 X 0
N8227 X 0
N8228 X 0
N8229 X 0
N8230 X 0
N8231 X 0
N8232 X 0
N8233 X 0
N8234 X 0
N8235 X 0
N8236 X 0
N8237 X 0
N8238 X 0
N8239 X 0
N8240 X 0
N8241 X 0
N8242 X 0
N8243 X 0
N8244 X 0
N8245 X 0
N8246 X 0
N8247 X 0
N8248 X 0
N8249 X 0
N8250 X 0
N8251 X 0
N8252 X 0
N8253 X 0
N8254 X 0
N8255 X 0
N8600 X 0
N8601 X 0
N8602 X 0
N8603 X 0
N8604 X 0
N8605 X 0
N8606 X 0
N8607 X 0
N8608 X 0
N8609 X 0
N8610 X 0
N8611 X 0
N8612 X 0
N8613 X 0
N8614 X 0
N8615 X 0
N8616 X 0
N8617 X 0
N8618 X 0
N8619 X 0
N8620 X 0
N8621 X 0
N8622 X 0
N8623 X 0
N8624 X 0
N8625 X 0
N8626 X 0
N8627 X 0
N8628 X 0
N8629 X 0
N8630 X 0
N8631 X 0
N8632 X 0
N8633 X 0
N8634 X 0
N8635 X 0
N8636 X 0
N8637 X 0
N8638 X 0
N8639 X 0
N8640 X 0
N8641 X 0
N8642 X 0
N8643 X 0
N8644 X 0
N8645 X 0
N8646 X 0
N8647 X 0
N8648 X 0
N8649 X 0
N8650 X 0
N8651 X 0
N8652 X 0
N8653 X 0
N8654 X 0
N8655 X 0
N8656 X 0
N8657 X 0
N8658 X 0
N8659 X 0
N8660 X 0
N8661 X 0
N8662 X 0
N8663 X 0
N8664 X 0
N8665 X 0
N8666 X 0
N8667 X 0
N8668 X 0
N8669 X 0
N8670 X 0
N8671 X 0
N8672 X 0
N8673 X 0
N8674 X 0
N8675 X 0
N8676 X 0
N8677 X 0
N8678 X 0
N8679 X 0
N8680 X 0
N8681 X 0
N8682 X 0
N8683 X 0
N8684 X 0
N8685 X 0
N8686 X 0
N8687 X 0
N8688 X 0
N8689 X 0
N8690 X 0
N8691 X 0
N8692 X 0
N8693 X 0
N8694 X 0
N8695 X 0
N8696 X 0
N8697 X 0
N8698 X 0
N8699 X 0
N8700 X 0
N8701 X 0
N8702 X 0
N8703 X 0
N8704 X 0
N8705 X 0
N8706 X 0
N8707 X 0
N8708 X 0
N8709 X 0
N8710 X 0
N8711 X 0
N8712 X 0
N8713 X 0
N8714 X 0
N8715 X 0
N8716 X 0
N8717 X 0
N8718 X 0
N8719 X 0
N8720 X 0
N8721 X 0
N8722 X 0
N8723 X 0
N8724 X 0
N8725 X 0
N8726 X 0
N8727 X 0
N8728 X 0
N8729 X 0
N8730 X 0
N8731 X 0
N8732 X 0
N8733 X 0
N8734 X 0
N8735 X 0
N8736 X 0
N8737 X 0
N8738 X 0
N8739 X 0
N8740 X 0
N8741 X 0
N8742 X 0
N8743 X 0
N8744 X 0
N8745 X 0
N8746 X 0
N8747 X 0
N8748 X 0
N8749 X 0
N8750 X 0
%

[underthetire]

How to do that? I don´t know if this is possible on my machine, but i can do if you recommend it !

I don't recommend one way or the other. What I have seen is parameters get lost, someone puts in factory parameters to get the machine running, then X axis is all buggered up. If this ends up being the case, then PM me and I can email the set up sheet.

[Waynno]

I don't recommend one way or the other. What I have seen is parameters get lost, someone puts in factory parameters to get the machine running, then X axis is all buggered up. If this ends up being the case, then PM me and I can email the set up sheet.

What would be buggered up? Only thing I can think of would be centerline
adjustment for zero return and backlash settings

Do you have procedure for drive adjustment? One of mine was fiddled with
when I got that machine, and has never sounded like it is tuned correct

Thanks

Wayne

[underthetire]

What would be buggered up? Only thing I can think of would be centerline
adjustment for zero return and backlash settings

Do you have procedure for drive adjustment? One of mine was fiddled with
when I got that machine, and has never sounded like it is tuned correct

Thanks

Wayne

Zero return will go wrong direction, there was some wiring, I think it was for the tach, tool presetter, jog stick. Soft limits parameter as well. Was about 5 things that had to be changed. I'll look for drive tuning procedure tonight, i don't remember seeing it in my data file, but it could be there.

[amadeo_ortiz]

Hey Wayne Let me send you a present from my country! [email protected] please send me a mail adress to send you something what you want from Mexico! I will be glad to do it, man you saved my life!! wonderful help i will enter all the parameters in a few minutes! Thank you very much

[amadeo_ortiz]

I don't recommend one way or the other. What I have seen is parameters get lost, someone puts in factory parameters to get the machine running, then X axis is all buggered up. If this ends up being the case, then PM me and I can email the set up sheet.

would you send to my email your data sheet friend?

[underthetire]

I can and will. It will be in about 2 1/2 hours though.

[amadeo_ortiz]

Wayne i have entered most of your parameter manually because i haven´t my PC cable I´ve invested maybe 3 hours on it and i have finished them but appears another trouble, i couldn´t enter from #6030 to #6049 i think that my lathe is only SL-2 and not SL-2H could has a restriction, then when i turn on my NC appears first the normally Servo Off Alarm then i press again the Power On twice and display on CRT the 341 Alarm Servo Error (X) maybe i need to reenter Settings and Diagnostics too, so i believe if you can make me another big favor sending your Settings and Diagnostics File if it is possible.

Thanks a lot for your help
Best Regards from Mexico!

Parameter list for SL-2H

N6000 X 32
N6001 X 129
N6002 X 128
N6003 X 17
N6004 X 2
N6005 X 70
N6006 X 20
N6007 X 68
N6008 X 0
N6009 X 192
N6010 X 49
N6011 X 0
N6012 X 0
N6013 X 0
N6014 X 0
N6015 X 0
N6016 X 0
N6017 X 131
N6018 X 0
N6019 X 32
N6020 X 7
N6021 X 12
N6022 X 131
N6023 X 0
N6024 X 68
N6025 X 0
N6026 X 7
N6027 X 25
N6028 X 7
N6029 X 25
N6030 X 0
N6031 X 1
N6032 X 14
N6033 X 85
N6034 X 0
N6035 X 92
N6036 X 92
N6037 X 0
N6038 X 0
N6039 X 65
N6040 X 255
N6041 X 63
N6042 X 3
N6043 X 250
N6044 X 98
N6045 X 102
N6046 X 31
N6047 X 123
N6048 X 34
N6049 X 0
N6050 X 12
N6051 X 12
N6052 X 0
N6053 X 0
N6054 X 0
N6055 X 0
N6056 X 64
N6057 X 64
N6058 X 0
N6059 X 0
N6060 X 0
N6061 X 0
N6062 X 0
N6063 X 0
N6064 X 0
N6065 X 0
N6066 X 0
N6067 X 0
N6068 X 0
N6069 X 0
N6070 X 0
N6071 X 0
N6072 X 0
N6073 X 0
N6074 X 64
N6075 X 64
N6076 X 0
N6077 X 0
N6078 X 0
N6079 X 0
N6080 X 8
N6081 X 15
N6082 X 0
N6083 X 3
N6084 X 6
N6085 X 10
N6086 X 0
N6087 X 0
N6088 X 0
N6089 X 0
N6090 X 0
N6091 X 0
N6092 X 25
N6093 X 10
N6094 X 7
N6095 X 10
N6096 X 0
N6097 X 0
N6098 X 0
N6099 X 0
N6100 X 0
N6101 X 0
N6102 X 0
N6103 X 0
N6104 X 0
N6105 X 0
N6106 X 0
N6107 X 0
N6108 X 0
N6109 X 0
N6110 X 0
N6111 X 0
N6112 X 0
N6113 X 0
N6114 X 23
N6115 X 24
N6116 X 51
N6117 X 52
N6118 X 0
N6119 X 0
N6120 X 0
N6121 X 0
N6122 X 0
N6123 X 0
N6124 X 0
N6125 X 0
N6126 X 0
N6127 X 0
N6128 X 0
N6129 X 0
N6130 X 0
N6131 X 0
N6132 X 0
N6133 X 0
N6134 X 0
N6135 X 0
N6136 X 0
N6137 X 0
N6138 X 0
N6139 X 0
N6140 X 0
N6141 X 0
N6142 X 0
N6143 X 0
N6144 X 0
N6145 X 0
N6146 X 0
N6147 X 0
N6148 X 0
N6149 X 0
N6160 X 0
N6161 X 0
N6162 X 0
N6163 X 0
N6164 X 0
N6165 X 0
N6166 X 0
N6167 X 0
N6168 X 0
N6169 X 0
N6170 X 0
N6171 X 0
N6172 X 0
N6173 X 0
N6174 X 0
N6175 X 0
N6176 X 0
N6177 X 0
N6178 X 0
N6179 X 0
N6180 X 0
N6181 X 0
N6182 X 0
N6183 X 0
N6184 X 0
N6185 X 0
N6186 X 0
N6187 X 0
N6188 X 0
N6189 X 0
N6190 X 0
N6191 X 0
N6192 X 0
N6193 X 0
N6194 X 0
N6195 X 0
N6196 X 0
N6197 X 0
N6198 X 0
N6199 X 0
N6200 X 0
N6201 X 0
N6202 X 500
N6203 X 500
N6204 X 0
N6205 X 0
N6206 X 0
N6207 X 0
N6208 X 0
N6209 X 0
N6210 X 0
N6211 X 0
N6212 X 0
N6213 X 0
N6214 X 0
N6215 X 0
N6216 X 0
N6217 X 0
N6218 X 0
N6219 X 0
N6220 X 40
N6221 X 0
N6222 X 800
N6223 X 0
N6224 X 40
N6225 X 0
N6226 X 0
N6227 X 0
N6228 X 9600
N6229 X 0
N6230 X 10
N6231 X 128
N6232 X 0
N6233 X 0
N6234 X 3
N6235 X 4
N6236 X 6
N6237 X 8
N6238 X 12
N6239 X 20
N6240 X 30
N6241 X 40
N6242 X 60
N6243 X 80
N6244 X 120
N6245 X 200
N6246 X 300
N6247 X 400
N6248 X 600
N6249 X 800
N6250 X 1200
N6251 X 2000
N6252 X 3000
N6253 X 4000
N6254 X 0
N6255 X 0
N6256 X 0
N6257 X 0
N6258 X 0
N6259 X 0
N6260 X 0
N6261 X 0
N6262 X 0
N6263 X 0
N6264 X 0
N6265 X 0
N6266 X 1310
N6267 X 4000
N6268 X 0
N6269 X 0
N6270 X 0
N6271 X 1310
N6272 X 4000
N6273 X 0
N6274 X 0
N6275 X 30
N6276 X 0
N6277 X 0
N6278 X 0
N6279 X 0
N6280 X 1280
N6281 X 1280
N6282 X 0
N6283 X 0
N6284 X 0
N6285 X 0
N6286 X 50
N6287 X 50
N6288 X 0
N6289 X 0
N6290 X 0
N6291 X 0
N6292 X 0
N6293 X 0
N6294 X 0
N6295 X 0
N6296 X 0
N6297 X 0
N6298 X 0
N6299 X 0
N6300 X 0
N6301 X 0
N6302 X 0
N6303 X 0
N6304 X 3410
N6305 X 2654
N6306 X 0
N6307 X 0
N6308 X 0
N6309 X 0
N6310 X 40
N6311 X 40
N6312 X 0
N6313 X 0
N6314 X 0
N6315 X 0
N6316 X 20
N6317 X 20
N6318 X 0
N6319 X 0
N6320 X 0
N6321 X 0
N6322 X 0
N6323 X 0
N6324 X 0
N6325 X 0
N6326 X 0
N6327 X 0
N6328 X 0
N6329 X 0
N6330 X 0
N6331 X 0
N6332 X 0
N6333 X 0
N6334 X 0
N6335 X 0
N6336 X 0
N6337 X 0
N6338 X 0
N6339 X 0
N6340 X 0
N6341 X 0
N6342 X 0
N6343 X 2600
N6344 X 430
N6345 X 2000
N6346 X 15
N6347 X 0
N6348 X 0
N6349 X 0
N6500 X 0
N6501 X 0
N6502 X 0
N6503 X 0
N6504 X 0
N6505 X 0
N6506 X 0
N6507 X 0
N6508 X 0
N6509 X 0
N6510 X 0
N6511 X 0
N6512 X 0
N6513 X 0
N6514 X 0
N6515 X 0
N6516 X 0
N6517 X 0
N6518 X 0
N6519 X 0
N6520 X 0
N6521 X 0
N6522 X 0
N6523 X 0
N6524 X 0
N6525 X 0
N6526 X 0
N6527 X 0
N6528 X 0
N6529 X 0
N6530 X 0
N6531 X 0
N6532 X 0
N6533 X 0
N6534 X 0
N6535 X 0
N6536 X 0
N6537 X 0
N6538 X 0
N6539 X 0
N6540 X 0
N6541 X 0
N6542 X 0
N6543 X 0
N6544 X 0
N6545 X 0
N6546 X 0
N6547 X 0
N6548 X 0
N6549 X 0
N6550 X 0
N6551 X 0
N6552 X 0
N6553 X 0
N6554 X 0
N6555 X 0
N6556 X 0
N6557 X 0
N6558 X 0
N6559 X 0
N6560 X 0
N6561 X 0
N6562 X 0
N6563 X 0
N6564 X 0
N6565 X 0
N6566 X 0
N6567 X 0
N6568 X 0
N6569 X 0
N6570 X 0
N6571 X 0
N6572 X 0
N6573 X 0
N6574 X 0
N6575 X 0
N6576 X 0
N6577 X 0
N6578 X 0
N6579 X 0
N6600 X 263200
N6601 X 49780
N6602 X 0
N6603 X 0
N6604 X 0
N6605 X 0
N6606 X- 56800
N6607 X- 360220
N6608 X 0
N6609 X 0
N6610 X 0
N6611 X 0
N6612 X 0
N6613 X 0
N6614 X 0
N6615 X 0
N6616 X 0
N6617 X 0
N6618 X 0
N6619 X 0
N6620 X 0
N6621 X 0
N6622 X 0
N6623 X 0
N6624 X 0
N6625 X 0
N6626 X 0
N6627 X 0
N6628 X 0
N6629 X 0
N6630 X 0
N6631 X 0
N6632 X 0
N6633 X 0
N6634 X 0
N6635 X 0
N6636 X 0
N6637 X 0
N6638 X 0
N6639 X 0
N6640 X 0
N6641 X 0
N6642 X 0
N6643 X 0
N6644 X 0
N6645 X 0
N6646 X 0
N6647 X 0
N6648 X 0
N6649 X 0
N6650 X 0
N6651 X 0
N6652 X 0
N6653 X 0
N6654 X 0
N6655 X 0
N6656 X 0
N6657 X 0
N6658 X 0
N6659 X 0
N7000 X 12
N7001 X 1
N7002 X 0
N7003 X 0
N7004 X 0
N7005 X 0
N7006 X 1
N7007 X 1
N7008 X 0
N7009 X 0
N7010 X 0
N7011 X 0
N7012 X 0
N7013 X 0
N7014 X 0
N7015 X 1
N7016 X 0
N7017 X 0
N7018 X 0
N7019 X 0
N7020 X 0
N7021 X 0
N7022 X 0
N7023 X 0
N7024 X 1
N7025 X 0
N7026 X 0
N7027 X 0
N7028 X 0
N7029 X 0
N7030 X 2
N7031 X 0
N7032 X 0
N7033 X 0
N7034 X 0
N7035 X 0
N7036 X 0
N7037 X 0
N7038 X 0
N7039 X 0
N7040 X 0
N7041 X 0
N7042 X 3
N7043 X 6
N7044 X 5
N7045 X 10
N7046 X 12
N7047 X 9
N7048 X 18
N7049 X 20
N7050 X 17
N7051 X 34
N7052 X 36
N7053 X 33
N7054 X 0
N7055 X 0
N7056 X 0
N7057 X 0
N7058 X 0
N7059 X 0
N7060 X 50
N7061 X 80
N7062 X 12
N7063 X 0
N7064 X 0
N7065 X 0
N7066 X 0
N7067 X 50
N7068 X 16
N7069 X 8
N7070 X 5
N7071 X 10
N7072 X 0
N7073 X 0
N7074 X 0
N7075 X 0
N7076 X 0
N7077 X 0
N7078 X 80
N7079 X 0
N7080 X 0
N7081 X 0
N7082 X 0
N7083 X 0
N7084 X 0
N7085 X 0
N7086 X 0
N7087 X 0
N7088 X 0
N7089 X 0
N7090 X 0
N7091 X 2
N7092 X 0
N7093 X 0
N7094 X 0
N7095 X 8
N7096 X 0
N7097 X 0
N7098 X 0
N7099 X 0
N8000 X 0
N8001 X 0
N8002 X 0
N8003 X 0
N8004 X 0
N8005 X 0
N8006 X 0
N8007 X 0
N8008 X 0
N8009 X 0
N8010 X 0
N8011 X 0
N8012 X 0
N8013 X 0
N8014 X 0
N8015 X 0
N8016 X 0
N8017 X 0
N8018 X 0
N8019 X 0
N8020 X 0
N8021 X 0
N8022 X 0
N8023 X 0
N8024 X 0
N8025 X 0
N8026 X 0
N8027 X 0
N8028 X 0
N8029 X 0
N8030 X 0
N8031 X 0
N8032 X 0
N8033 X 0
N8034 X 0
N8035 X 0
N8036 X 0
N8037 X 0
N8038 X 0
N8039 X 0
N8040 X 0
N8041 X 0
N8042 X 0
N8043 X 0
N8044 X 0
N8045 X 0
N8046 X 0
N8047 X 0
N8048 X 0
N8049 X 0
N8050 X 0
N8051 X 0
N8052 X 0
N8053 X 0
N8054 X 0
N8055 X 0
N8056 X 0
N8057 X 0
N8058 X 0
N8059 X 0
N8060 X 0
N8061 X 0
N8062 X 0
N8063 X 0
N8064 X 0
N8065 X 0
N8066 X 0
N8067 X 0
N8068 X 0
N8069 X 0
N8070 X 0
N8071 X 0
N8072 X 0
N8073 X 0
N8074 X 0
N8075 X 0
N8076 X 0
N8077 X 0
N8078 X 0
N8079 X 0
N8080 X 0
N8081 X 0
N8082 X 0
N8083 X 0
N8084 X 0
N8085 X 0
N8086 X 0
N8087 X 0
N8088 X 0
N8089 X 0
N8090 X 0
N8091 X 0
N8092 X 0
N8093 X 0
N8094 X 0
N8095 X 0
N8096 X 0
N8097 X 0
N8098 X 0
N8099 X 0
N8100 X 0
N8101 X 0
N8102 X 0
N8103 X 0
N8104 X 0
N8105 X 0
N8106 X 0
N8107 X 0
N8108 X 0
N8109 X 0
N8110 X 0
N8111 X 0
N8112 X 0
N8113 X 0
N8114 X 0
N8115 X 0
N8116 X 0
N8117 X 0
N8118 X 0
N8119 X 0
N8120 X 0
N8121 X 0
N8122 X 0
N8123 X 0
N8124 X 0
N8125 X 0
N8126 X 0
N8127 X 0
N8128 X 0
N8129 X 0
N8130 X 0
N8131 X 0
N8132 X 0
N8133 X 0
N8134 X 0
N8135 X 0
N8136 X 0
N8137 X 0
N8138 X 0
N8139 X 0
N8140 X 0
N8141 X 0
N8142 X 0
N8143 X 0
N8144 X 0
N8145 X 0
N8146 X 0
N8147 X 0
N8148 X 0
N8149 X 0
N8150 X 0
N8151 X 0
N8152 X 0
N8153 X 0
N8154 X 0
N8155 X 0
N8156 X 0
N8157 X 0
N8158 X 0
N8159 X 0
N8160 X 0
N8161 X 0
N8162 X 0
N8163 X 0
N8164 X 0
N8165 X 0
N8166 X 0
N8167 X 0
N8168 X 0
N8169 X 0
N8170 X 0
N8171 X 0
N8172 X 0
N8173 X 0
N8174 X 0
N8175 X 0
N8176 X 0
N8177 X 0
N8178 X 0
N8179 X 0
N8180 X 0
N8181 X 0
N8182 X 0
N8183 X 0
N8184 X 0
N8185 X 0
N8186 X 0
N8187 X 0
N8188 X 0
N8189 X 0
N8190 X 0
N8191 X 0
N8192 X 0
N8193 X 0
N8194 X 0
N8195 X 0
N8196 X 0
N8197 X 0
N8198 X 0
N8199 X 0
N8200 X 0
N8201 X 0
N8202 X 0
N8203 X 0
N8204 X 0
N8205 X 0
N8206 X 0
N8207 X 0
N8208 X 0
N8209 X 0
N8210 X 0
N8211 X 0
N8212 X 0
N8213 X 0
N8214 X 0
N8215 X 0
N8216 X 0
N8217 X 0
N8218 X 0
N8219 X 0
N8220 X 0
N8221 X 0
N8222 X 0
N8223 X 0
N8224 X 0
N8225 X 0
N8226 X 0
N8227 X 0
N8228 X 0
N8229 X 0
N8230 X 0
N8231 X 0
N8232 X 0
N8233 X 0
N8234 X 0
N8235 X 0
N8236 X 0
N8237 X 0
N8238 X 0
N8239 X 0
N8240 X 0
N8241 X 0
N8242 X 0
N8243 X 0
N8244 X 0
N8245 X 0
N8246 X 0
N8247 X 0
N8248 X 0
N8249 X 0
N8250 X 0
N8251 X 0
N8252 X 0
N8253 X 0
N8254 X 0
N8255 X 0
N8600 X 0
N8601 X 0
N8602 X 0
N8603 X 0
N8604 X 0
N8605 X 0
N8606 X 0
N8607 X 0
N8608 X 0
N8609 X 0
N8610 X 0
N8611 X 0
N8612 X 0
N8613 X 0
N8614 X 0
N8615 X 0
N8616 X 0
N8617 X 0
N8618 X 0
N8619 X 0
N8620 X 0
N8621 X 0
N8622 X 0
N8623 X 0
N8624 X 0
N8625 X 0
N8626 X 0
N8627 X 0
N8628 X 0
N8629 X 0
N8630 X 0
N8631 X 0
N8632 X 0
N8633 X 0
N8634 X 0
N8635 X 0
N8636 X 0
N8637 X 0
N8638 X 0
N8639 X 0
N8640 X 0
N8641 X 0
N8642 X 0
N8643 X 0
N8644 X 0
N8645 X 0
N8646 X 0
N8647 X 0
N8648 X 0
N8649 X 0
N8650 X 0
N8651 X 0
N8652 X 0
N8653 X 0
N8654 X 0
N8655 X 0
N8656 X 0
N8657 X 0
N8658 X 0
N8659 X 0
N8660 X 0
N8661 X 0
N8662 X 0
N8663 X 0
N8664 X 0
N8665 X 0
N8666 X 0
N8667 X 0
N8668 X 0
N8669 X 0
N8670 X 0
N8671 X 0
N8672 X 0
N8673 X 0
N8674 X 0
N8675 X 0
N8676 X 0
N8677 X 0
N8678 X 0
N8679 X 0
N8680 X 0
N8681 X 0
N8682 X 0
N8683 X 0
N8684 X 0
N8685 X 0
N8686 X 0
N8687 X 0
N8688 X 0
N8689 X 0
N8690 X 0
N8691 X 0
N8692 X 0
N8693 X 0
N8694 X 0
N8695 X 0
N8696 X 0
N8697 X 0
N8698 X 0
N8699 X 0
N8700 X 0
N8701 X 0
N8702 X 0
N8703 X 0
N8704 X 0
N8705 X 0
N8706 X 0
N8707 X 0
N8708 X 0
N8709 X 0
N8710 X 0
N8711 X 0
N8712 X 0
N8713 X 0
N8714 X 0
N8715 X 0
N8716 X 0
N8717 X 0
N8718 X 0
N8719 X 0
N8720 X 0
N8721 X 0
N8722 X 0
N8723 X 0
N8724 X 0
N8725 X 0
N8726 X 0
N8727 X 0
N8728 X 0
N8729 X 0
N8730 X 0
N8731 X 0
N8732 X 0
N8733 X 0
N8734 X 0
N8735 X 0
N8736 X 0
N8737 X 0
N8738 X 0
N8739 X 0
N8740 X 0
N8741 X 0
N8742 X 0
N8743 X 0
N8744 X 0
N8745 X 0
N8746 X 0
N8747 X 0
N8748 X 0
N8749 X 0
N8750 X 0
%

[Waynno]

Set the System rotary switch to "5" that should allow the rest to be entered

As undertire kinda alluded to, These are to get you up and going, Adjustments
to the parameters maybe needed to spot on with all the safety zones and other stuff

The X servo error may not be parameter related, try to find reset button at the drive board

Wayne

[amadeo_ortiz]

Wayne there are not already alarms on my display now, i´m testing the lathe yet the spindle works, the jog works, the parts catcher works fine but my tooling turret doesn´t respond well when tool change needed I feel than you have all the solutions Master Lord Wayne LOL!! when i set Tool Number 6 goes on number 4, when i set tool number 4 still spining and it never stops, well there are finally adjustments my turret is for 10 tool holders, Do you have same number of tool holders on your turret Wayne?

Set the System rotary switch to "5" that should allow the rest to be entered

As undertire kinda alluded to, These are to get you up and going, Adjustments
to the parameters maybe needed to spot on with all the safety zones and other stuff

The X servo error may not be parameter related, try to find reset button at the drive board

Wayne

[amadeo_ortiz]

thank you very much, let me start my lathe Underthetire an let it works and i will try this change that you say it could improve the programming using a software to do the GCodes faster and easier but i need to check some PRM´s because i´ve reading you mail and the numbers than Wayne sended beacuse mismatch a little bit. i.e. #6600 you says to change 13,000 but i have on Wayne´s chart 263,200 and #6606 -30,000 and I tried with -56,800, Really i need to let my lathe works perfect and then we can improve making that changes!! thanks a lot friend!

I can and will. It will be in about 2 1/2 hours though.

[Waynno]

That parameter set is for a 12 station turret, im looking in the book for that specific
parameter. When we do pin it down, you will need to set turret switch to 1 position
and let it re-sequence itself.