585,982 active members*
4,549 visitors online*
Register for free
Login

Thread: Ramp?

Results 1 to 3 of 3
  1. 02-15-2011, 03:53 PM #1
    tsaladyga
    tsaladyga is offline Registered
    Join Date
    Aug 2009
    Posts
    37

    Ramp?

    Any one know how to do a ramp move in Pro?
    I am trying to do a simple slot using trajectory mill and I can't get the stupid thing to spit out a ramp cycle! It is so simple in Mastercam but Pro is a lot more cumbersome. Any help would be really appreciated.
    Thanks,
    tsaladyga
    Reply With Quote Reply With Quote
  2. 02-15-2011, 08:38 PM #2
    NM_88
    NM_88 is offline Registered
    Join Date
    Feb 2011
    Posts
    0
    you could sketch your entry. Our try useing a diffrent sequence such as volume milling.
    Reply With Quote Reply With Quote
  3. 10-31-2013, 12:04 AM #3
    yar_seliva
    yar_seliva is offline Registered
    Join Date
    Mar 2007
    Posts
    11
    Try Build cut | Approach | Helical. Enter the parameters and it should do the trick.

    yar_seliva
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Calculation of ramp angle
    By mrk in forum Coding
    Replies: 6
    Last Post: 04-22-2011, 03:21 AM
  2. RAMP out on a Pocket
    By Allen123 in forum MetalWork Discussion
    Replies: 2
    Last Post: 06-12-2009, 06:41 PM
  3. To Ramp or to Plunge?
    By bborb in forum MetalWork Discussion
    Replies: 13
    Last Post: 01-22-2009, 03:50 PM
  4. ramp milling
    By almachinist in forum Fanuc
    Replies: 3
    Last Post: 01-20-2009, 04:36 PM
  5. Ramp in Z Toolpath
    By solgood in forum BobCad-Cam
    Replies: 4
    Last Post: 08-15-2006, 04:35 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules