[kelticwarrior]

mori seki sh 630 with fanuc 16 model c control error code:

first we had spindle alarms: servo alarm axis torque alarm: spindle servo link start fault

spindle servo breaker was open, closed it and restarted normally.

following several x axis alarms being cleared and checking program I have the following which we have not seen before, anybody know what it wants?

ex 1257 power mate alarm

[underthetire]

Sorry, didn't see this one, I know it's been a few weeks. Power mate on a sh series machine is for the magazine. 1257 probably means you either lost batteries, or it needs zero return, or both. Some newer machines have a pmm screen to see alarms on the power mate, older ones require a handy to plug in. The red alarm lights should give you the basics in either case. I have the procedure for zero return if you still need it.

[IndyMike]

we also have the mori seki sh 630 with fanuc 16 and got the ex 1257 power mate alarm. We have been trying to zero return the magazine with no success. if you have the have the procedure for zero return of magazine, this would be very helpfull

[p0dster]

do you still have procedure to hand ? if so can i have a copy . have a sh630 with ex 1257 but cant seem to get magazine to reference, custom enter 95 with feed hold flashing data input 122.0 enter 1 lets me jog but cant reference any help appreciated

[formermachinist]

Hi p0dster,
I'm running in that same issue with our sh630.
Did you ever fixed that problem?

[VecCNC]

Hi underthetire, I've just found your old post about the Mori Seiki SH-63.
My batteries went down and I need the tool magazine reference procedure.
Any chance you could send it to me ?
Thanks.

[Pedro_LL]

please, i have a same problem with our machine Mori seiki SH 630. displayed EX1257 alarm and i need procedure to return reference magazine, if can you help me will appreciate
thanks

[Brandonzimm]

Did you guys ever figure this out? I am running into this problem on the mori-seiki SH630 on fanuc controls. I need help asap. Anyone help me out?