Anyone have a mill/turn post for a Daewoo Lathe with a Fanuc 21TB control they might share? Or for that matter any fairly generic mill/turn post to give me something to start with.
Thanks,
Mike
Thread: Post for Daewoo w/Fanuc 21TB
Results 1 to 1 of 1
-
03-11-2011, 10:05 PM #1
Registered
- Join Date
- Feb 2011
- Posts
- 0
Post for Daewoo w/Fanuc 21TB
Reply With QuoteSimilar Threads
-
Problem with G02/G03 on Fanuc 21tb
By dj_deadman666 in forum FanucReplies: 8Last Post: 04-16-2010, 08:29 AM -
Daewoo Puma 700M W/Fanuc 21i-TB
By skeeterzx210 in forum Daewoo/DoosanReplies: 4Last Post: 06-05-2009, 04:52 AM -
DAEWOO PUMA 10 W/FANUC 3-T
By wes4540 in forum Daewoo/DoosanReplies: 2Last Post: 04-28-2009, 05:56 PM -
Daewoo puma 12-l fanuc 0-T-A control
By smts in forum Daewoo/DoosanReplies: 5Last Post: 03-29-2008, 02:27 AM -
FANUC 21i-TB on Daewoo PUMA400
By neroseu in forum FanucReplies: 3Last Post: 10-18-2006, 12:23 PM
Posting Permissions
