Our CNC Router was acquired from the Chinese company Bodor, and right we have a problem with its movement. When we try to move the gantry 1mm using the PC software, the actual movement of the gantry 14mm. How do we adjust this?
Sorry if I posted it in the wrong category.. I can't seem find out where I should post this.
Thread: movement ratio problem
Results 1 to 1 of 1
-
03-30-2011, 04:36 PM #1
Registered
- Join Date
- Mar 2011
- Posts
- 0
movement ratio problem
Reply With QuoteSimilar Threads
-
Problem with tight quill movement
By laser3kw in forum Bridgeport / Hardinge MillsReplies: 6Last Post: 01-27-2011, 01:14 AM -
Y Axis Movement Problem
By WilliamWoodWork in forum K2CNCReplies: 0Last Post: 08-04-2010, 02:13 PM -
Movement Problem
By Ramu in forum CNC Machining CentersReplies: 0Last Post: 04-03-2010, 11:59 AM -
Coordinated movement problem
By kdoney in forum Uncategorised MetalWorking MachinesReplies: 4Last Post: 08-27-2004, 06:23 PM
Posting Permissions
