Hi all,

I would like to announce a new product from dumpsterCNC: This is a complete leadnut/leadscrew upgrade set for your MaxNC 5/10. This set will replace the stock 1/4"-20 leadnuts and leadscrews that came with your MaxNC 5 or 10 with 1/4"-16 ACME screws and anti-backlash leadnuts. This is for the Max's that have X8" Y5" & Z6" of travel.

Our test machine is getting nearly ZERO backlash, .0005" is the worst case.

For more info and pictures, please visit: http://www.gonebowlin.com/dumpsterCNC/

Thanks,
Tim
dumpsterCNC
http://www.gonebowlin.com/dumpsterCNC