Hello,
I am probably just overlooking a simple technique. What I am needing to do is write a macro in Mach and have a F1 or F2 keyboard key to run it. I can write the macros. Have done it already but I have them linked to screen buttons. I have built a MP2CP pendant kit and want to now use the Mac1 and Mac2 buttons to activate the same macros as the screen buttons. Just can't seem to figure it out. Please what am I missing? Thanks for the help in advance. Ron
Thread: Linking a macro to keyboard key
Results 1 to 3 of 3
-
04-07-2011, 01:50 AM #1
Registered
- Join Date
- Jun 2003
- Posts
- 167
Linking a macro to keyboard key
-
04-07-2011, 01:51 AM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Assign a hotkey to the button in the screen designer.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
04-07-2011, 01:56 AM #3
Registered
- Join Date
- Jun 2003
- Posts
- 167
Thanks Gerry will try that tomorrow. Sounds simple,I knew it was something simple I was just not seeing. Thanks again Ron
Reply With QuoteSimilar Threads
-
Linking Problem!
By picks in forum MastercamReplies: 3Last Post: 03-08-2011, 05:55 AM -
Linking a FADAL 4020 to PC
By erutter in forum FadalReplies: 0Last Post: 09-18-2010, 05:20 PM -
X3 Not linking to Mach
By mikemill in forum Syil ProductsReplies: 3Last Post: 01-27-2010, 05:59 PM
Posting Permissions
