Cost matters. The end goal is for interior church signage.
Overview:
Our goal is to have these letters finalized in a silver metal-looking finish - we are willing to paint and finish wood if metal is too expensive. They will be mounted straight to a painted wall. These should be smooth-cut letters with nice edges.
I can supply an Adobe Illustrator eps or ai file with fonts as vector if that helps. The font is Frutiger Bold 65, but I can typeset it all if that helps.
Letters needed for the following words (upper lower case as indicated; height of capital letter is indicated)
All letters cut from 1/2" thick stock:
- Welcome Stand (7"cap. letter)
- Resource Center (8" cap. letter)
- Sanctuary (7"cap. letter)
- Event Registration (7" cap letter)
- Fair Trade (4" cap. letter)
- Coffee (6" cap letter)
Please help us by:
- Please estimate wood, metal, or acrylic, or all three if you are able
- Please give us a good accurate estimate of turn-around time. We need these by the 22nd of this month at the latest.
- Please figure on providing the materials from your own sources. We understand it may not be possible to accurately estimate material cost, but we expect a solid ballpark number
- Midwest cutters preferred. We are located in Indiana.
- Time is short (only 10 days), so I'll leave this RFQ open for about 5 days.
If this is the wrong forum, please redirect me to the correct one.
Contact:
Please respond to me here via email in case the PM limit here is too small. My gmail account name is "robotor" - you can figure out what my gmail email address is from there.