Newbie Question - First Post - I want to build lightweight electronics chassis out of aluminum. I am currently building everything from pre-folded boxes, typically of 3/32 soft aluminum, using a drill press and chassis punches.
I already have a product and customers and not a lot of time to develop my own machine. Is there something simple and robust that I could use to make holes on three sides of an aluminum box. I don't mind doing this in a few steps but I do need the clearance for a chassis box that is 10 x 20 x 3. I would like to find a finished unit ready to operate, Software, and interface, all in one package. Any thoughts?
Robert
Results 1 to 3 of 3
-
04-16-2011, 03:46 PM #1
Registered
- Join Date
- Apr 2011
- Posts
- 0
Need CNC Machine for lightweight Chassis
-
04-20-2011, 04:51 PM #2
Registered
- Join Date
- May 2006
- Posts
- 803
Robert, what is the part quantity, and your budget?
It may be cheaper to "own the data" and sub out the cutting, there are many out here with machines.Been doing this too long
-
05-24-2011, 05:04 PM #3
Registered
- Join Date
- Feb 2011
- Posts
- 0
can do all that on a brother high speed machining center
contact me at [email protected]
Reply With QuoteSimilar Threads
-
Chassis Maker II CNC Punching Machine
By billober33157 in forum Uncategorised MetalWorking MachinesReplies: 2Last Post: 12-30-2010, 07:10 PM -
Drawing a chassis
By motas in forum Hobby DiscussionReplies: 30Last Post: 11-24-2010, 10:40 AM -
RFQ Amp Chassis
By osoloco69 in forum Employment OpportunityReplies: 2Last Post: 11-09-2007, 04:56 PM -
lightweight spindle for engraving?
By ljoe1969 in forum DIY CNC Router Table MachinesReplies: 0Last Post: 03-14-2007, 04:48 AM -
New Haas Lightweight Router, Info?
By dansutula in forum Haas MillsReplies: 1Last Post: 09-06-2006, 04:41 PM
Posting Permissions
