[LazyMan]

I'm trying to get dimensions for various routers in particular the

- Hitachi M12VC 2-1/4
- Porter-Cable 892 2-1/4
-PC7518
-Milwaukee 5625
- Bosch 1617EV
-Dewalt DW618
-Makita RF1101
-Ridgid R29302 2HP

Dimension C is from lowest motor clamp area to collet nut end. Accurate dimensions not super critical, withing 1/16th would be nice. Dimension A accuracy within 1/8th would be fine. Any dimensions you guys could give for any of the routers would be very appreciated.

[CarveOne]

These are actual measurements of my routers, not from a vendor CAD drawing.

- Hitachi M12VC 2-1/4hp

A= 4.290" (largest measurement diagonal to brush holder bumps)
B= 3.950"
C= 1.330" (Precise Bits collet nut is installed)
D= 3.265"


-PC7518 3-1/4hp

A= 4.920" (largest measurement diagonal to corners of the cap)
B= 4.750"
C= 1.55" (Precise Bits collet nut is installed)
D= 4.205"
E= 4.355" (these are the four pins that stick out from the body diameter)

CarveOne

[JC50]

I have a Dewalt 618.
A is 4"
B =4
C=1 3/8
D =3.5"

[ger21]

PC 892

A = 3-3/4" round, but 4-1/2" where the screws are.
B = 4-1/2"
C = 1-11/16"
D = 3-1/2"

Here's a 3D model in AutoCAD format.
Porter Cable 892

[LazyMan]

Very helpful, thanks guys!

[adamgood]

A bit late! but maybe still of use.

A = 4 1/8"
B = 3 7/16
C = 1 9/16
D = 3 7/32

I am sure Makita is designed using metric but hay, "in Rome..."