Hi,
I'm not sure about this forum rules, so it's better to discuss technical questions on my support forum.
core and interface programs were merged, but start options are still available.
-e ethernet boards
-u usb boards
-s simulator mode
-d debug info
-p profile_name - will start software with given profile
options may be merged, for example
-de -p Plasma -------- will start with Ethernet board, profile from "Plasma" folder
To be honest - I don't know exactly.
For G-code language implementation I'm using "CNC Programming Handbook" by Peter Smid and G-code language description from LinuxCNC project. Some of language extensions (about parameterized programming) we added ourself, so it's not standard.
We have Pro-Engineer software, there are about 6 Fanuc postprosessors, 2 of them suit perfectly to myCNC.
I'm afraid - you need to test to find out the right one. You may send me samples to find- what's wrong.
We had this kind of options in previous generation of software. We will add it asap to myCNC. We appreciate any kind of customer suggestion
For THC control we use myTHC-RU01 board. It is connected to main controller through RS 485. Settings and commands from the software transferred directly to THC board, the software displays data from THC.
So Volatge and other THC settings works with hardware, but it is not implemented for simulator.
Thank you for your interest,
regards,
myCNC