Hello.
I have used Edgecam for programming, and when the machinig is finish, the z axis go in z positiv untill it reach the limit switch...
Someone know why?
Here is the G-Code.
Greetings from Robert.
Hello.
I have used Edgecam for programming, and when the machinig is finish, the z axis go in z positiv untill it reach the limit switch...
Someone know why?
Here is the G-Code.
Greetings from Robert.
My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html
I don't know your machine limits, or where you've got your machine zeroed. But line 'N73' commands the Z axis to move in the Z positive direction to 60.0
But line N65 also commands the same move. Is this move within the movement limits?
Yeah, it goes 60mm over homing position. And the limit switch is on 100-150 i think...
It work now, but do not work properly...
Robert.
My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html