Is it possible to change the default text style in Auto CAD 2000?. I really dislike the default tech font style. I'd like to change it to one that I like to use most often. Not the typical font a drafter would use, but I'd like to make it personal.
Thread: Re Assigning Text Style
Results 1 to 3 of 3
-
05-16-2011, 04:04 PM #1
Registered
- Join Date
- Jan 2004
- Posts
- 668
Re Assigning Text Style
-
05-16-2011, 11:56 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Format > Text Style
Note that Text Styles are saved in the drawing or template, so you'll either need to create a new template, or save the default one with the modified Text Style.Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
05-17-2011, 02:28 PM #3
Registered
- Join Date
- Jan 2004
- Posts
- 668
Sometimes I feel really dumb. I knew that!
Reply With QuoteSimilar Threads
-
Assigning offset numbers to a tool in Powermill
By Making chips in forum PowerMILLReplies: 0Last Post: 11-15-2010, 12:34 AM -
NEW HM-070,NEW STYLE
By Nemo1985 in forum News AnnouncementsReplies: 0Last Post: 12-15-2009, 07:23 AM -
Nl assigning temporary C zero.
By macca22 in forum Mori Seiki lathesReplies: 2Last Post: 12-10-2009, 01:22 AM -
G-10 Fanuc Style ???
By Ox1 in forum CamSoft ProductsReplies: 7Last Post: 07-01-2009, 11:38 PM -
Assigning pins on mesa 7i37
By ozturbo in forum LinuxCNC (formerly EMC2)Replies: 6Last Post: 07-24-2008, 03:51 AM
Posting Permissions
