[robbec]

Hi all,

Bit of background info:

I have just been in contact with a sales person at Weihong regarding a replacement PCI card to for the old tempramental 3G one I have. They were all ok at the start by emailing me info on the new card they recommended as a replacement & requesting machine specs , then over MSN tonight they said my card was a copy, then they said it was indeed one of there cards but they would not deal with me directly, I must go to a manufacturer that installs their cards

This leads me to this post:

I would like to keep using NCStudio so am looking to upgrade my current card to one that is not so tempramental & could fail at any stage (when weihong were told the card was 4 years old their response was one of surprise). Can anyone out there suggest where/who I am able to go to in order to source pricing etc on a new card. It was suggested a PCIMC 53B/C card was the one I needed. I cannot afford for my current card to fail so would like to sort this out in advance.


Any help greatly appreciated

Thanks in advance

Rob

[Tigertecchina]

Hi Rob,
Maybe I can help you on that.
You can send me the photo of that PCI card, I will show to our engineer and try to get the one you need.
Regards,
Diana
TigerTec CNC, Inc.
C1207 Sanqing Financial Center, Chonghua Road
High-Tech Industry, Jinan, China 250101
Tel: 0086-531-82386606 Fax: 0086-531-82386689
Cell Phone: 0086-13335116636
MSN: [email protected]
MSN: [email protected]
E-mail: [email protected]
Website: TigerTec

[robbec]

Hi Diana, thanks for the reply.

Attached are a couple of pictures, on of the existing card & one of the breakout board.

Let me know if you are able to help me & details of your recommendations, pricing etc.

Thanks

Rob