[dnormand25]

Does anyone know the proper procedure for calibrating the router to the boring head? I have a setup manual for a morbidelli, but it seems to vary from the record.I'd give a first born for a printed manual. I can get either to machine accurately in the X,Y,and Z axis, but not both together. Any help would be appreciated. I have spoken to SCM, But the instructions kinda vary with the tech and the last set of directions doesn't seem to work. I can change the accuracy bu manipulating the required axis in the axis config file, but I thought the Pheads file was for the router, at least that's where for the Morbidelli k2.

Thanks for any help,
Dave

[Baldo]

Hi dnormand25

just look at your post today.... I have a RECORD-120 and MORBIDELLI A504K

Find a file 8090.XPI and make a backup, you can modify the positions to calibrate the head

[UncleAugie]

Hi dnormand25

just look at your post today.... I have a RECORD-120 and MORBIDELLI A504K

Find a file 8090.XPI and make a backup, you can modify the positions to calibrate the head

Baldo, do you still have your Record 120? I have just aquired a 120 and have little to no documentation. Hoping you might be able to help