I'm selecting the bottom face of a pocket. Choosing to rough with a 1/2" EM. Now, I need to go back with a 1/4" EM to clean up the corners, and where webs still exist between areas to small for the larger end mill.
Gibbs cam is new to us, I can knock it out on Pro/NC no problem. I'm working late into the night on this, so any help would be appreciated.
Thread: roughing and finish pass
Results 1 to 2 of 2
-
05-25-2011, 02:43 AM #1
Registered
- Join Date
- May 2006
- Posts
- 94
roughing and finish pass
-
05-25-2011, 07:30 PM #2
Registered
- Join Date
- Aug 2009
- Posts
- 235
Do another roughing op, but check "use stock" and "material only". Its at the bottom of the roughing prosses window.
Reply With QuoteSimilar Threads
-
How to chamfer/finish pass
By wildwhl in forum CamBamReplies: 6Last Post: 10-09-2012, 01:49 PM -
what bit to use on roughing pass in cherry?
By groomden in forum WoodWorking TopicsReplies: 3Last Post: 10-07-2009, 08:22 PM -
Finish Cutting pass.
By Greg Maxwell in forum MastercamReplies: 2Last Post: 11-21-2007, 06:10 PM -
Z level finishing does not finish final depth pass
By TPPJR in forum OneCNCReplies: 13Last Post: 01-10-2006, 03:22 PM -
Empty Roughing pass
By new2cnc in forum MastercamReplies: 1Last Post: 05-28-2005, 02:31 PM
Posting Permissions
