[larryy1022]

Hello guys,


Here share the demo video of our latest XPTHC-300. We used a 800 USD cheap plasma cut warp steel, and 10cm high bevel cutting to demo the THC's work. we used to use powermax 1650 for THC testing, but it is too good a plasma, has no interference at all, so we changed to this cheap plasma with very strong interference.

Please check follow link to see the demo videos,
hydcnc11


Also attached a picture of XPTHC-300 here.

Any comment, please advise freely.
Tks
larry

[larryy1022]

Newly made another demo video of our auto ignitor for flame cutting torch,

It support DC/AC24V, so AC/DC solenoid valve, both are ok.
And no interference at all.

We can say our High voltage transformer is the best on market, second to none.
Please check the same link, or visit our website,

Tks
larry

[larryy1022]

Here made a video of company(HYD).
It is just to show that we are a serious company developing THC, and truely supplying over 8000 pcs different THCs every year.

It should be hard for problem-product to reach this sale, and you can see from the video, if our product is untrustable, we've already been buried by the big warehouse stock.

But...... I have to admit that, our company looks a little messy.................
same link as before,
hydcnc11

Tks
larry