584,802 active members*
5,071 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Join Date
    Oct 2010
    Posts
    197

    Post Processors

    Could someone please advise what is the difference between a

    Hass_VF_Metric Rev1
    and a
    Hass_TM_Metric Rev1

    I expect the VF and the TM is something really simple, but I cannot figure it out.

    These can be down loaded from the BobCad sight.

    Thanking you in advance
    Kel

  2. #2
    Join Date
    Apr 2008
    Posts
    1577
    I haven't looked at either post but the TM may be for a Tool Room mill that doesn't have an automatic tool changer.

  3. #3
    Join Date
    Oct 2010
    Posts
    197
    Thank you SBC cycle.
    Any idea what a VF is ??

    Regards
    Kel

  4. #4
    Join Date
    Mar 2010
    Posts
    1852
    A VF is just the standard Haas Vertical CNC Mill. Like VF-1, VF-2, VF-10 etc. All the Haas machines use the same code but there will be differences in features and such that the different posts will handle.

    Mike
    Two Haas VF-2's, Haas HA5C, Haas HRT-9, Hardinge CHNC 1, Bother HS-300 Wire EDM, BobCAD V23, BobCAD V28

  5. #5
    Join Date
    Oct 2010
    Posts
    197
    Thank you Mike
    That explains it.

    Regards
    Kel

Similar Threads

  1. Post Processors
    By mrcodewiz in forum Dolphin CAD/CAM
    Replies: 5
    Last Post: 02-19-2024, 08:40 AM
  2. how do I set my post processors
    By Alan0166 in forum BobCad-Cam
    Replies: 4
    Last Post: 06-04-2015, 08:15 AM
  3. Post Processors
    By bigbadtom in forum Mastercam
    Replies: 2
    Last Post: 01-26-2010, 02:02 AM
  4. What are 'post-processors'?
    By Countryman in forum Uncategorised CAM Discussion
    Replies: 4
    Last Post: 07-15-2009, 12:55 PM
  5. V20 post processors
    By doug6949 in forum BobCad-Cam
    Replies: 5
    Last Post: 02-22-2005, 02:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •