498,723 active members
6,789 visitors online
Register for free
Login
Results 1 to 10 of 10
  1. #1
    Registered
    Join Date
    Feb 2009
    Posts
    227

    Lets Share!!!!! (cut files)

    Hello Everyone,

    So I have been meaning to do this for awhile, I want to start a thread with nothing but cool cut files for others to use without having to put in the effort of drawing or minipulating files, basically ready to go (dxf, dwg, eps....etc) I think this could be cool because we could share alot and show pictures of the end products, plus this is the reason we all have cnc machines to have some fun with the end results.... Happy Cutting :cheers:

    Attached is some cool things I picked out of my folders that I think you guys would like... I will spread them over a couple of post so we dont get to disorganized (group)

    1) A flock of sandhill cranes ( actual size) that I made with my father ( both back and front wing + body)... We used .060 alum. for both body and wings, the legs and feet are small rebar, the head we did by hand brass and copper.
    Attached Thumbnails Attached Thumbnails crane pic 1.jpg   crane pic 2.jpg  
    Attached Files Attached Files

  2. #2
    Registered
    Join Date
    Feb 2009
    Posts
    227

    Some More Cut Files!!!!

    Here is some more cut files for you guys....

    Also a school of fish that I did with my father for some wall art.... ( make tab in fish to match size of the material thickness....)

    Another file is an FSU and Gator logo for all you college football fans the file needs some work but it is really cool, its in layers so you can paint each layer to match the real logo.... (dxf file I have is too large to upload right now so I will break it down later)

    Some other files is a killer whale with her baby, a small lattice 90 degree shelve bracket and so on.....

    Happy Cutting Enjoy..... :banana:
    Attached Thumbnails Attached Thumbnails atlspade.jpg  
    Attached Files Attached Files

  3. #3
    Registered
    Join Date
    Oct 2010
    Posts
    87

    Thank you for sharing

    Great Job

    I am building my table now, I will share some drawing if it is finished

  4. #4
    Registered
    Join Date
    Feb 2009
    Posts
    227
    Quote Originally Posted by mcv300 View Post
    Great Job

    I am building my table now, I will share some drawing if it is finished
    Thanks for the reply mcv300,

    Good Luck on your build, I wish some other people would post up some cool cut files and not leave me out to dry.... Its been plenty of time but just every one is consuming and no one is giving back for this thread to work... Come on guys post up some cut files.....:wave:

  5. #5
    Registered
    Join Date
    Jan 2011
    Posts
    0
    You know there's already a 600+ page thread on file sharing, right? http://www.cnczone.com/forums/genera..._part_art.html
    Carl

  6. #6
    Registered
    Join Date
    Nov 2010
    Posts
    0
    they all seem to be for engraving in the art thread?
    I'm in the parts collection part of a new build so unfortunately nothing to share. I will be drawing up a few simple tabs and brackets ready for my table over the next few weeks and will throw them up here.

  7. #7
    Registered
    Join Date
    Feb 2009
    Posts
    227
    Quote Originally Posted by I Lean View Post
    You know there's already a 600+ page thread on file sharing, right? http://www.cnczone.com/forums/genera..._part_art.html
    I lean,

    Thanks for the heads up... I may move this thread over to the link you showed me... Just not sure on how to do that... lol :withstupi

  8. #8
    Registered
    Join Date
    Feb 2011
    Posts
    0
    Quote Originally Posted by Dustin407 View Post
    Hello Everyone,

    So I have been meaning to do this for awhile, I want to start a thread with nothing but cool cut files for others to use without having to put in the effort of drawing or minipulating files, basically ready to go (dxf, dwg, eps....etc) I think this could be cool because we could share alot and show pictures of the end products, plus this is the reason we all have cnc machines to have some fun with the end results.... Happy Cutting :cheers:

    Attached is some cool things I picked out of my folders that I think you guys would like... I will spread them over a couple of post so we dont get to disorganized (group)

    1) A flock of sandhill cranes ( actual size) that I made with my father ( both back and front wing + body)... We used .060 alum. for both body and wings, the legs and feet are small rebar, the head we did by hand brass and copper.
    SANDHILL CRANES ARE AWESOME THANKS FOR SHAREING

  9. #9
    Registered
    Join Date
    Feb 2009
    Posts
    227
    Quote Originally Posted by stinger1 View Post
    SANDHILL CRANES ARE AWESOME THANKS FOR SHAREING
    You very welcome, Enjoy... :cheers: Post a pic if you make one of them id love to see it...

  10. #10
    Registered
    Join Date
    Jan 2009
    Posts
    87
    Just saw this. Great stuff for sure. Thanks for posting!
    Anything is possible, just build it!

Similar Threads

  1. Share Your Files Part or Art
    By lakeside in forum General Metalwork Discussion
    Replies: 11564
    Last Post: 03-11-2019, 03:40 PM
  2. Share your 3D Carving files, Parts or Art
    By yohudi in forum General Woodworking
    Replies: 599
    Last Post: 11-17-2016, 08:42 PM
  3. Why doesn't anyone share post processor files.
    By keystone76 in forum Post Processor Files
    Replies: 14
    Last Post: 01-27-2011, 02:17 PM
  4. ok share the knowledge share the wealth...huh...right
    By oaktree444 in forum General Metalwork Discussion
    Replies: 9
    Last Post: 10-18-2005, 10:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •