The normal program drills with the quil or "w" since it is a boring mill.
G83 x1. y1. w-1.340 Q .1 R.1 F2.
I'm looking to get a closer rapid return than .1 and it won't read a "P.02" for instance. Any help is much appreciated. Thanks.
The normal program drills with the quil or "w" since it is a boring mill.
G83 x1. y1. w-1.340 Q .1 R.1 F2.
I'm looking to get a closer rapid return than .1 and it won't read a "P.02" for instance. Any help is much appreciated. Thanks.
My 11M-A manual says that the return distance for G83 is set by parameter #6211. P is a dwell time at the bottom of the hole in G82, G88 and G89.