584,866 active members*
4,919 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2011
    Posts
    0

    Acramatic 2100 Help

    Hello I'm new to the forum and need help. I just bought a Prolight 5000 mill that came with an old Acramatic 2100 control. The control had a Cincinnati logo on it so it seems it is not original to the mill.

    My problem is the hard drive is physically missing from the Acramatic 2100. I think I can get a new hard drive but the software might be a problem. Dave Lyle at Siemens said he would look into it for me but it would be about $1200 if it is available at all. I think there must be original drive images floating around out there where if some where, if some one could point me in the right direction I would really appreciated it.

    Failing getting the A2100 to run the mill can anyone recommend a DC servo controller that I could use to run the with Mach3 or similar software?

    Any advice would be very much appreciated.

    Thanks,
    John

  2. #2
    Join Date
    Feb 2011
    Posts
    423
    There is a guy on Ebay that sells the hard drives with the software loaded for around $150.

Similar Threads

  1. Acramatic 2100 help!!
    By SBAGHAEI in forum Cincinnati CNC
    Replies: 17
    Last Post: 07-14-2016, 08:28 PM
  2. Need Help, Acramatic 2100
    By acra2100 in forum Controller & Computer Solutions
    Replies: 1
    Last Post: 10-07-2009, 10:15 AM
  3. Acramatic 2100 G83
    By cnccalgary in forum MetalWork Discussion
    Replies: 1
    Last Post: 03-11-2009, 04:03 PM
  4. Acramatic 2100
    By mblazenby in forum Tree
    Replies: 4
    Last Post: 02-05-2009, 02:30 PM
  5. acramatic 2100
    By greg b in forum Controller & Computer Solutions
    Replies: 0
    Last Post: 09-07-2008, 12:02 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •