[landart]

I have 3-Vexta 5-phase stepping motors model# pk564ana-tg30 DC 1.4a
0.7ohm .024/step 5 wire leads, 30:1 gear box installed on them......I cant seem to find any info on them. Can these be used with gecko drives or xylotex for my cnc router. Any info that you could shine on the subject would be great.
JIM

[prof_hazem2]

I have 3-Vexta 5-phase stepping motors model# pk564ana-tg30 DC 1.4a
0.7ohm .024/step 5 wire leads, 30:1 gear box installed on them......I cant seem to find any info on them. Can these be used with gecko drives or xylotex for my cnc router. Any info that you could shine on the subject would be great.
JIM

will you built the driver by your self

[torquemada]

Hi prof_hazem2,

I have three (5-Phase) VEXTA A3530-9215 --- 2,6 A/PHASE, 5 wire. I suppose that the configuration is pentagonal type.
Me you can pass information ?.

If you have electrical scheme, or control program.

Thanks