584,808 active members*
5,169 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Mar 2006
    Posts
    6

    Connecting Vacuum to Gerber Sabre

    Hi All

    I've purchased a second hand Gerber Sabre 408 router. It came with a vacuum generator that connects to the table. Unfortunately, it was disconnected when the machine was decommissioned 4 years ago. I can't find any documentation on how to reconnect.

    If anyone has one of these machines, would you mind letting me know how to wire it into the table. There is a seimens controller on the side of the router. I believe that this is somehow related to the vacuum pump.

    Thanks in advance.

  2. #2
    Join Date
    May 2008
    Posts
    85
    We have ours wired to a separate switch. As far as I know there is no hookup to the control in any way.

    Don't know what the Siemens controller is for.

Similar Threads

  1. Gerber Sabre 408 help...
    By crackstar in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 10
    Last Post: 06-19-2018, 01:29 PM
  2. Gerber Sabre 408 Lead screw and nut
    By fbrinc in forum Commercial CNC Wood Routers
    Replies: 4
    Last Post: 12-28-2011, 12:00 PM
  3. Evaluating a Gerber Sabre
    By ToolslingerNJ in forum Want To Buy...Need help!
    Replies: 3
    Last Post: 05-22-2011, 02:51 AM
  4. Running g-code on gerber sabre 408
    By precise graphix in forum G-Code Programing
    Replies: 0
    Last Post: 08-04-2008, 07:37 PM
  5. Gerber Sabre 408
    By Pasty in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 07-21-2008, 03:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •