Good Morning all!!
I turned on my 2000 haas vf-2 this morning and the screen only shows one line---03A028EA 0020
The machine wont do anything and i cant erase/reset/cancel
I tried powering it completly off with the switch in the back and the line changed to 03A000F8 0020
Please help if anybody knows what my machines problem is.
Thanks
Thread: Angry VF-2
Results 1 to 4 of 4
-
06-22-2011, 02:07 PM #1
Registered
- Join Date
- Sep 2008
- Posts
- 8
Angry VF-2
-
06-22-2011, 06:04 PM #2
Moderator
- Join Date
- Mar 2003
- Posts
- 4826
Phone Haas tech support. But I'd have to wonder if it is indicative of a bad memory chip, assuming the machine does some sort of memory check on startup.
First you get good, then you get fast. Then grouchiness sets in.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
06-23-2011, 05:33 AM #3
Registered
- Join Date
- Jul 2005
- Posts
- 207
Try holding down the "PRGRM/CONVRS" button and power on the machine. Tell us what you get.
-
06-23-2011, 03:31 PM #4
Registered
- Join Date
- Aug 2010
- Posts
- 579
These messages are an indication of a software/hardware failure, there is no "soft" recovery from this condition. Please contact your local HFO for support:
HFO-Denver
A Division of Moncktons Machine Tools
637 Osage Street
Denver, CO 80204
Phone: (303) 571-4933
E-mail Address: [email protected]Thanks,
Ken Foulks
Reply With Quote
Posting Permissions
