584,861 active members*
4,643 visitors online*
Register for free
Login
Results 1 to 15 of 15
  1. #1
    Join Date
    Jun 2011
    Posts
    9

    Chiron FZ12W High speed Siemens 810m error codes

    Hello everyone,

    Sorry if this is in the wrong forum, but I'm in need of help figuring out what some error codes mean

    I've looked at the operation and programming manual (http://support.automation.siemens.co...edownload=true) but it isn't exactly enlightening. What it says is that alarm 8, 13 and 1080 only happen on commissioning, alarm 3 needs a service technician and alarm 2000 is the only one with meaningful information:

    Reason:
    The EMERGENCY STOP signal is output from the PLC to the NC
    Effect:
    Inhibiting of NC START
    – Operation is brought to a defined stop
    – Servo enable is removed
    – Follow up operation
    Remedy:
    Check to see if the EMERGENCY STOP cam was traversed to, or if
    the EMERGENCY STOP switch was operated"

    Alarm 2000 should be a simple fix I think. Just checking all the switches on each axis plus maybe a few others.

    The original cause of the problems is that the machine got connected to 440V and it's only rated for 220V.

    Any suggestions.

    Thanks,

  2. #2
    Join Date
    Feb 2009
    Posts
    6028
    Ya smoked the memory/Cpu.

  3. #3
    Join Date
    Jun 2011
    Posts
    9
    Sounds like it could be expensive.

    It's a good thing I have committed to buying the machine.

  4. #4
    Join Date
    Jun 2011
    Posts
    9
    Anyway to tell if it's the memory or CPU or is it pretty much guaranteed that they are both fried? Do you think that replacing those would fix the other alarms?

  5. #5
    Join Date
    Feb 2009
    Posts
    6028
    Well, PLC stop and Emergency stop would make sense if the CPU and memory is gone. Problem is, you really cant test drives and such until you get that fixed. Maybe a lot more damage than meets the eye. You probably need someone more familiar with Seimens, those arn't popular in the US.

  6. #6
    Join Date
    Nov 2006
    Posts
    925
    Each thing will need to be checked through.You have a screen up so can`t be fatal.
    You need someone capable to go through it.The drives can be tested independently with a battery box which is standard procedure for commissioning the machine anyway.
    Probably Siemens 6SC610 drives on that machine.
    I`ve got a Chiron FZ12S with 810 control.They are quite simple machines.

  7. #7
    Join Date
    Jun 2011
    Posts
    9
    I just heard back from Chirons Siemens tech and he's saying that the machine just needs the original parameters and settings loaded. I'll be testing the drives later this week hopefully.

  8. #8
    Join Date
    Mar 2008
    Posts
    169
    You have to cahnge the battery and reload all parameters. You need %TEA1, %TEA2, %PCP, %SPF, and %ROA,Start loading this files, If you can't maybe you have a hardware problem.

    Carlos



    Quote Originally Posted by efret View Post
    I just heard back from Chirons Siemens tech and he's saying that the machine just needs the original parameters and settings loaded. I'll be testing the drives later this week hopefully.

  9. #9
    Join Date
    Jan 2013
    Posts
    3
    Hi,
    I need Chiron Fz12 NC Parameter an PLC program.
    Thanks.

  10. #10
    Join Date
    Apr 2013
    Posts
    2

    Re: Chiron FZ12W High speed Siemens 810m error codes

    Hi friend Alicnc,
    Are you having the chiron machine NC and PLC backup.
    Last week machine parameter lost due to battery problem.
    CHIRON FZ12W MAGNUM HIGH SPEED
    SINUMERIK 810M GRAUNDAUSF3
    MANUFACTURE YEAR 1997

    Regards,
    Dhina

  11. #11
    Join Date
    Mar 2015
    Posts
    4

    Re: Chiron FZ12W High speed Siemens 810m error codes

    hi folks
    i have fz12w 810m ga3 chiron because of dead battery i lost all parameters i found tea1 tea2 but i need pcp file if anyone can help ill be appricated
    thanks all.

  12. #12
    Join Date
    Aug 2009
    Posts
    115

    Re: Chiron FZ12W High speed Siemens 810m error codes

    Quote Originally Posted by hkdman View Post
    hi folks
    i have fz12w 810m ga3 chiron because of dead battery i lost all parameters i found tea1 tea2 but i need pcp file if anyone can help ill be appricated
    thanks all.
    Hello,

    please give me more infos, I can help you

  13. #13
    Join Date
    Mar 2010
    Posts
    1852

    Re: Chiron FZ12W High speed Siemens 810m error codes

    Quote Originally Posted by tld70 View Post
    Hello,

    please give me more infos, I can help you
    Over two year old post!
    Two Haas VF-2's, Haas HA5C, Haas HRT-9, Hardinge CHNC 1, Bother HS-300 Wire EDM, BobCAD V23, BobCAD V28

  14. #14
    Join Date
    Jan 2013
    Posts
    73
    Hi, do you have parameters for Chiron FZ12W High speed 1996 Siemens 810m GA3? Thank you

  15. #15
    Join Date
    Dec 2019
    Posts
    12
    I have same problem.. need parameters for Chiron FZ12W.
    [email protected] phone +38766284310

Similar Threads

  1. Chiron FZ12 with siemens 810M . Softkeys not working.
    By terrycoughlan in forum SIEMENS -> Sinumerik 810M/810T
    Replies: 2
    Last Post: 04-09-2015, 07:06 PM
  2. Chiron FZ12W Tool does not clamp in spindle (HELP!!!)
    By cs_sas in forum DNC Problems and Solutions
    Replies: 12
    Last Post: 03-06-2015, 02:51 PM
  3. Chiron FZ12w Fanuc 21i
    By singist42 in forum Fanuc
    Replies: 16
    Last Post: 02-22-2014, 08:56 AM
  4. chiron fz12w spindle quick repair
    By mantenim in forum Videos
    Replies: 1
    Last Post: 04-13-2013, 10:51 AM
  5. Siemens 810M 1682 error code
    By mjhjenks in forum Controller & Computer Solutions
    Replies: 1
    Last Post: 12-17-2010, 04:26 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •