now that i've built my table, and have been cutting with it for a month or more now, i'd like to go back and figure out what my *exact* cost was.. i kept all my receipts.i have a nasty feeling i spent more than i thought (nickle and dime stuff)
i'd like to compare it to OffTheShelf units.. both 4'x4' and 4'x8' sizes.
anyone have any specific prices for units with THC -- and maybe even links?
i've done some websearches, but other than TorchMate and PlasmaCAM, i can't get pricing from other companies without going the full blown sales-rep/faxes/phonecalls route.
-tony
Thread: approximate cost to BUY?
Results 1 to 3 of 3
-
09-10-2005, 07:07 PM #1
Registered
- Join Date
- Apr 2005
- Posts
- 55
approximate cost to BUY?
-
09-28-2005, 04:54 AM #2
Registered
- Join Date
- Dec 2004
- Posts
- 28
You Can Get An Sc10 From Thermal Dynamics For About 4600.00 Us Or Camsoft Has The Electronic Part Of The Controler For About 800.00 But As Far As Anything Else Goes You Wind Up In The 10000 To 20000.00 Range I Have Look At A Lot Of Options There Are Not Many Choises.
-
10-01-2005, 08:49 PM #3
Registered
- Join Date
- Aug 2004
- Posts
- 104
There is no many option some are, for THC: Innerlogic and Thermal Dynamics...
Reply With Quote
Posting Permissions
