584,861 active members*
4,717 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Jul 2011
    Posts
    0

    citizen l20 type 9

    I am doing a 3.5" deep hole in 5/8" copper. When i go to od turn The barloader is alarming out ($5 overload). Is my tourqe setting too high? I can not figure it out and the material is very pricey.

  2. #2
    Join Date
    Jul 2011
    Posts
    0
    on the last few pecks the machine is making a wierd noise.

  3. #3
    Join Date
    Oct 2008
    Posts
    108
    Are you using coolant through drills? It sioounds to me like you might be pushing the material back with the drill and causing an A7 overload, especially if its making a strange noise the last two pecks.
    www.atmswiss.com

  4. #4
    Join Date
    Jul 2011
    Posts
    0
    Figured it out. I did a g83 to 3" then for the rest i did a feed in feed out. Thanks though

Similar Threads

  1. CITIZEN L20 TYPE 8
    By chet470 in forum CNC Swiss Screw Machines
    Replies: 2
    Last Post: 07-01-2011, 04:04 AM
  2. Citizen A20 Type 6 or 7 ??
    By will1717 in forum CNC Swiss Screw Machines
    Replies: 5
    Last Post: 01-26-2011, 07:09 PM
  3. G71/G72 type I vs. type II cycles
    By sinha_nsit in forum Fanuc
    Replies: 4
    Last Post: 08-28-2010, 11:20 AM
  4. Citizen L25
    By appusivadas in forum CNC Swiss Screw Machines
    Replies: 4
    Last Post: 07-16-2009, 02:51 PM
  5. G71 type I and type II cycles
    By sinha_nsit in forum Fanuc
    Replies: 5
    Last Post: 11-03-2008, 12:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •