Hello i need some information on a Fanuc controlled Kia SKT28lm lathe. the manuals leave allot of information out. i lost my tailstock program and need to get a copy of someone else's. i hope someone else with the same machine can help me out.
Hello i need some information on a Fanuc controlled Kia SKT28lm lathe. the manuals leave allot of information out. i lost my tailstock program and need to get a copy of someone else's. i hope someone else with the same machine can help me out.
Sorry can't help you with that, but possibly interested in a lathe like yours. Has it operated to your expectations? Any problems? Thanks
Maybe there is a newer one avaibl but i just have this
%
O9020(M83 T/S PIN UP)
IF[#1000EQ1]GOTO10
#1=#4001
#2=#4006
#3=#4109
G21
#100=#5021
#101=#5022
#102=#502
#103=#503
#4=[#102-#100]
#5=[#103-#101]
G98G28U0
G00W#5
M83
G#1G#2F#3
G99
N10M99
%
/edit aww no i see it is a very old post xD
%
O9021(M84 T/S PIN DOWN)
#1=#4001
#2=#4006
G21
IF[#1001EQ1]GOTO10
IF[#503EQ#5022]GOTO3
N1IF[#1002EQ1]GOTO2
G98G00W-1.5
GOTO3
N2G98G00W1.5
GOTO3
N3M84
#502=#5021
#503=#5022
G#1G#2
G99
N1M99
%