584,874 active members*
5,271 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Okuma > Okuma Cadet OSP700 alarm 1055-20
Results 1 to 5 of 5
  1. #1
    Join Date
    Jan 2007
    Posts
    5

    Okuma Cadet OSP700 alarm 1055-20

    I am getting alarm #1055-20 Alarm A "VAC Power Circuit Low Voltage" when I power the machine up. After the alarm on the controller I get alarm 17 on the VAC Drive. Is it a problem with the VAC drive or power to the drive and how can I check?

  2. #2
    Join Date
    Dec 2008
    Posts
    3110
    First check to see if any of the 3 phase fuses are tripped on the power supply board before it comes into the machine

  3. #3
    Join Date
    Jan 2007
    Posts
    5
    3 phase power is all good, i have checked all fuses in the machine and on the drive and everything is good.

  4. #4
    Join Date
    Oct 2010
    Posts
    103
    Quote Originally Posted by b1apt View Post
    3 phase power is all good, i have checked all fuses in the machine and on the drive and everything is good.
    Do ya have any books on that? I'd power it up and check power if you haven't done that. Checking fuses may not reveal the problem. Could it be a contactor maybe? Just tossing thoughts. If you have the key for the door interlock, you should be able to fully power and operate with the door open

  5. #5
    Join Date
    Aug 2013
    Posts
    3
    Quote Originally Posted by b1apt View Post
    I am getting alarm #1055-20 Alarm A "VAC Power Circuit Low Voltage" when I power the machine up. After the alarm on the controller I get alarm 17 on the VAC Drive. Is it a problem with the VAC drive or power to the drive and how can I check?
    Did you ever figure this out ?
    I’m having this problem too.

Similar Threads

  1. How to run chip belt on Okuma LCS15 + OSP700?
    By testpilot in forum Okuma
    Replies: 5
    Last Post: 01-15-2014, 10:16 PM
  2. Okuma Cadet 999 Alarm A
    By MTIjake in forum Okuma
    Replies: 2
    Last Post: 12-11-2013, 07:32 PM
  3. Okuma Cadet LNC8 Alarm
    By 3DDonn in forum Okuma
    Replies: 6
    Last Post: 08-21-2013, 05:15 PM
  4. Okuma Cadet Graphing
    By Kart 34 in forum Okuma
    Replies: 2
    Last Post: 01-30-2008, 04:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •