585,931 active members*
5,107 visitors online*
Register for free
Login

Thread: Colchester CNC

Results 1 to 4 of 4
  1. 07-21-2011, 07:44 PM #1
    stevehday
    stevehday is offline *Registered User*
    Join Date
    Jul 2011
    Posts
    0

    Colchester CNC

    first post on here. a Colchester 2000 CNC lathe with the fanuc ot controller.
    it has alarms 310 and 320 REQUEST FOR REFERENCE POSITION RETURN we have now managed to clear these but now have two new overtravel alarms. thing is they are less than halfway through the axis travels.
    we have tried the p/can trick and the lathe is fully functional accept you can overtravel it!
    any help would be welcome
    Reply With Quote Reply With Quote
  2. 10-26-2012, 11:08 PM #2
    bertcnc
    bertcnc is offline Registered
    Join Date
    Oct 2006
    Posts
    78
    Noticed your post just now.
    i have a 2000l with an OT ,early version 1988.
    I have lost the parameters.Any chance you could help with a copy of yours.
    if you haven't resolved the problem with your machine PM me for advice
    Reply With Quote Reply With Quote
  3. 10-31-2012, 02:32 PM #3
    neil@exact
    neil@exact is offline Registered
    Join Date
    Oct 2012
    Posts
    0
    hi just purchased a tornado 200 cant get to power up alarm messages 1027.
    Reply With Quote Reply With Quote
  4. 11-10-2012, 12:30 AM #4
    bertcnc
    bertcnc is offline Registered
    Join Date
    Oct 2006
    Posts
    78
    From memory 1027 is hydraulic pressure fault.
    Check your main supply phase rotation
    Bert
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Hi from colchester
    By bugsyburrell in forum European Club House
    Replies: 1
    Last Post: 09-23-2010, 03:51 PM
  2. Buying a used Colchester
    By ragman in forum Colchester Tornado lathes
    Replies: 1
    Last Post: 09-05-2008, 10:01 PM
  3. ID Colchester Lathe
    By dwl in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 05-24-2008, 08:23 PM
  4. colchester cnc 200l
    By briggs in forum DNC Problems and Solutions
    Replies: 0
    Last Post: 04-07-2008, 07:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules