What happened to the Brissy group?
Is it still active or has it died the lack-of-bureaucratic-support death ?
What happened to the Brissy group?
Is it still active or has it died the lack-of-bureaucratic-support death ?
Damnit...!! I'm from bris and need some advice for a firstime build...
Come on brisvegas...!
Anyone know of any local brissy surppliers of linear motion parts..?
Hi
Brisbane has been very quiet.
I have seen this link posted a few times. They might be able to help.
linearbearings
Regards
Verm
Hello Eddy,
feel free to message me with your questions
Zig
Most probably too busy working ;-)
Sorry, gotta run
Hardly anyone wanted to help organise/contribute material/host/ etc.
I even did a website for the group that fell through because no-one bothered to contribute.
:violin:
Machinists do it with greater precision and less tolerance!
Hi Zig & Ash,
Yep the group died off and I got caught up dealing with personal and business issues which took priority at the time.
People seem to be still floating around so maybe there is hope that a gathering will happen again soon.
Lots of great people and heaps of experience and knowledge which should be shared.
Cheers,
Claudio
- WidgitMaster Wide Router with Kress FME 800, HobbyCNC 305oz Stepper Kit
- WidgitMaster Midi Router with Dremel
Hi all
I was wondering myself what had happened. I was just getting the cnc bug when all went quiet.
I was going to offer my services to host an event, as I have a small workshop that we could set up a few machines in to show and tell.
There is even a small brewery next door to organise refreshments!
Anyway if it ever gets going again the offer is open.
many brains can achive great things!!
Justin
Justin,
Organise a meeting and I can make sure it goes out to all the guys that previously attended.
I still keep in contact with some of the guys and most would be keen on getting something going, catch is none of us seem to have the time to organise.
Your thoughts?
Ash
Machinists do it with greater precision and less tolerance!
If I didn't have my current part time drafting job, I'd be there.
Unfortunately a tight timeline prevents just about any free time.
Next time gents.
Count me in on this one! Just need to know when & where and I'll be there.
I just sent an email to Borys, who should have the email lists of the guys that came to the last ones.
Thanks for taking the initiative to host a meeting.
I will be there and I can talk a bit about my current project (some vacuum forming)
Ash
Machinists do it with greater precision and less tolerance!
It turns out that Borys has somehow deleted all his 2009 emails.
Best thing to do would be to go back through the old threads and PM the details to all the guys that posted in the threads.
I'll dig some up.
http://www.cnczone.com/forums/cnczon...ser_group.html
http://www.cnczone.com/forums/austra...ser_group.html
http://www.cnczone.com/forums/austra...ser_group.html
http://www.cnczone.com/forums/austra...ser_group.html
that should keep ya busy
Machinists do it with greater precision and less tolerance!
Hello all
Can anyone advise if this event is happening today. I'm interested in attending.
Cheers
GPD
Hi All
I decided to postpone the meeting as there didnt seem to be alot of interest.
Perhaps it is a bit to close to xmas.
I will try again in the new year.
Anyone here with Mastercam experience who wants some part time / weekend work PM me please. Make sure you leave a contact number too.
Hi all,
There is a get together at my place at Algester on Saturday 12Feb12.
PM me and I will give you the address.
Regards
Chrisjh
Chris,
Any idea of the time frame on the day?
In any case I would like to pop around.
Zig
I'll be there (sent you a PM) and looking forward to it. Just one small thing, Saturday is the 11th even though either day is good for me.
Regards
Phil
Hi Zig,
10am to whenever you get bored.
Send me a PM with your email address and I will let you know the address and other details.
Regards
Chrisjh