We have a hitachi seiki "HC400" and it has a strange memory issue. This machine has 512k "1280 meters" according to the base 0 board and the program screen. When we try to send a program to the machine over 1162 meters of tape, the control hangs. We sent out the base 0 board for repair and were told that there was nothing wrong. We swapped the ram board from another machine to test that as well with the same results. I have checked the programs and there is no stop codes except the begining and at the end. The machie has a "micon 16" slave controller on board as well. We have had maintenance come out to our shop and they can not find anything wrong as well.
Thread: memory issues on fanuc 11m
Results 1 to 3 of 3
-
09-29-2005, 04:53 PM #1
Registered
- Join Date
- Jan 2004
- Posts
- 258
memory issues on fanuc 11m
-
09-29-2005, 07:29 PM #2
Registered
- Join Date
- Aug 2005
- Posts
- 48
the software that is on your machine will take up space ..like ...burning technoligies on an EDM... these can be removed to free the space up... if you need a drip feeder greco has one that works on Fanuc .. Jim
-
10-10-2005, 12:12 AM #3
Registered
- Join Date
- Sep 2005
- Posts
- 767
Drip-feeding a Fanuc 11M
Drip-feeding a Fanuc 11M is easy. All you need is PC software that can send files to the CNC using Xon/Xoff handshaking. The software must be able to handshake very efficiently, because the 11M will issue a "Buffer overflow" if the software handshakes too slowly.
You can download and try our PC-DNC Editor for 30 days at no cost. The link is:
http://www.sub-soft.com/download/Edi...itor_3.4.0.exe
Reply With Quote
Posting Permissions
