[bostosh]

Is there a standard drawing for a genuine American Standard Strat 11 mounting holes pickguard for interchangeability purposes ?
I have a genuine Fender pickguard in hand and will digitize (if necessary).

I do not wish to drill multiple holes nor fill and re-drill.

I am working with these two files.
http://members.cox.net/bostosh5/Pick...imensioned.dxf
http://members.cox.net/bostosh5/StratBP2201.jpg

Thanks in advance

[bostosh]

Can anyone confirm these dimensions?
http://members.cox.net/bostosh1/PICK...DIMENSIONS.DWG
I wish to use a standard interchangeable pickguard/mounting plate.i
I just do not wish to place bad hole locations.

[bostosh]

after many question of the experts and searching, I just went ahead and guessed (digitized with Microscribe G2) at it.
There must not be interchangeable parts for this pickguard.
I am used to having parts interchange as on autos.
Is this normal in the instrument construction world?
CAD data available for your critique.

[txcncman]

Your digitization and model are easy enough to confirm by measuring a sample center-hole to center-hole across the piece to several locations.