Hi,
Does any one have any information about coolant ribbon filtration or to filter the coolant without losing coolant quality and pressure on outlet up to 100 micron for MPX 620 Lathe or how can Ibuy such device.
Hi,
Does any one have any information about coolant ribbon filtration or to filter the coolant without losing coolant quality and pressure on outlet up to 100 micron for MPX 620 Lathe or how can Ibuy such device.
We use a Barnes fabric roller filter. That does the gross cleaning, supplies the coolant pump with ~50 micron cleaned coolant. It then goes through the coolant pump in to a 10 Micron canister filter, then the turret. Not a cheap solution for the average shop, but very very low maintenance.