Hello,

I have a Hanwha XD-20N 7 axis turning centre and I am looking for a probe to measure only the main OD of my workpieces that is +.005 mm -.000 mm in tolerance. The material is TZM (Molybdenum alloy) so the workpiece and most of the machine will be constantly in contact with coolant. Also the OD of the part is turned by a insert, if that's of importance.

I had a person from Renishaw in my shop already but he said the machine was too small for any of their probes to fit inside. Any ideas of any other companies that sell smaller probes?

Please ask if there is any other info I missed.

Thanks.