[uk125250]

Where is the best place to post? It's the Honda logo. My goal is to get it machined out of metal. Any suggestions on where to post. Thank you.

[Djurdjevic]

I can make it in artcam. How much are you ready to pay?
Thanks,
[email protected]

[uk125250]

Thanks for the reply. Ow much would it cost?

[BurrMan]

1 Meellion dollars!!! Muwahahahahahaha!!!

(Soory, couldnt resist)

[BurrMan]

You can always get them for free if reality and specific dimensions are not a requirement..

[uk125250]

The dimensions do matter. It is the word Honda, used for motorcycles. Just whatever font they use in use in all caps. Thank you BurrMan for the effort. I appreciate al the help I can get.

[gurew]

are you trying to get it cnc waterjet/plasma/laser or are you trying to get it milled?

[uk125250]

Whichever is cheaper, since I assume the results will be adequate with all those different methods. I have no idea of costs, so it may not be feasible at all. Would you have a price range, in your estimation, getting something like that done would be?

[Mike 1948]

Whichever is cheaper, since I assume the results will be adequate with all those different methods. I have no idea of costs, so it may not be feasible at all. Would you have a price range, in your estimation, getting something like that done would be?

Does this work for you.

Mike

[uk125250]

Does this work for you.

Mike

Not sure if you will be able to see link. I need the Honda racing lettering.

http://i246.photobucket.com/albums/g...R125IgnCvr.jpg

[drewj]

So do you want just the cad file or do you want the words "HONDA RACING" actually machined?

[Mike 1948]

Not sure if you will be able to see link. I need the Honda racing lettering.

http://i246.photobucket.com/albums/g...R125IgnCvr.jpg

Here is a dxf file for you

Mike

[uk125250]

So do you want just the cad file or do you want the words "HONDA RACING" actually machined?

I actually need them machined.

[uk125250]

Here is a dxf file for you

Mike

Thanks, what can I do with that? Sorry, for the ignorance.

[Mike 1948]

Thanks, what can I do with that? Sorry, for the ignorance.

Give it to the guy who is going to machine the letters. It gives him contours to cut to. Tell him you have "DXF" files of the letters.

Mike

[uk125250]

Give it to the guy who is going to machine the letters. It gives him contours to cut to. Tell him you have "DXF" files of the letters.

Mike

Thanks Mike. Can the machinist change the size of the letters?

[BurrMan]

This is kindof painful.......

Some more information on what you are looking for is required. If all you are doing is cutting letters, then pretty much any machinist can type them at any scale and cut them... If you are looking for some type of specific "shape" from the cut lettering, then more specific information and some examples posted would help get your answer...