Welcome!
I want to ask for help from you that you have a Freqrol FR-SFJ-2-3.7K-T type drive controller, and unfortunately do no have the parameter setting.
My question to you would be able to send e-mail, only the parameter setting?
Welcome!
I want to ask for help from you that you have a Freqrol FR-SFJ-2-3.7K-T type drive controller, and unfortunately do no have the parameter setting.
My question to you would be able to send e-mail, only the parameter setting?
hello,
whats the machıne type?
whats the serıal number
whats the controller or NC type?
hy
Machine Type: Traub TND 200 TX 8F
Type: BN405U504
Serieal: 160074
PCB: CA1B
UNIT: G
Mitsubishi Driver Control
I need a photo spindle drıve fr-sf unit
on the ca1b pcb card has an eeprom that keep parameters
this eeprom is broken or not ?
also you can enter the parameter by your hand that s parameter sheet must on the driver cover (grey cover)
was very bad in the eeprom and the data can be entered manually but alarm 37 Irish problem because we do not know the details, and the page parameter should
http://omkp.hu/hajtas/1.jpg
http://omkp.hu/hajtas/2.jpg
http://omkp.hu/hajtas/3.jpg
http://omkp.hu/hajtas/4.jpg
http://omkp.hu/hajtas/5.jpg